Olympus DCN1 Pin Tumbler Cam Lock Use

Olympus DCN1 pin tumbler cam lock provides keyed control for cabinets or enclosures built with 3/4 inch material thickness, so the cylinder length and cam reach are matched to common case construction. The oil rubbed bronze finish on this DCN1-10B-103 model delivers a dark, uniform face that blends with similar bronze hardware where visual continuity matters. The lock body and cylinder are zinc die cast pin tumbler components, which give a familiar key feel and a defined shear line suited to repetitive daily locking. This keyed alike 103 version keeps all matching cylinders on KA103, simplifying key management wherever one code is desired. The standard function allows the key to be removed in either the locked or unlocked position, supporting workflows where the operator does not stay at the door while it is open. Two reversible cams work in all positions, providing flexibility for different cam throw directions in the same basic lock body.

Key Olympus DCN1-10B-103 Working Details

• The 3/4 inch material thickness rating aligns the DCN1 lock body to typical cabinet door or drawer fronts, so the cam engages properly without odd spacers or over-travel.
• The oil rubbed bronze 10B finish lets the lock face match other bronze-finished hardware, keeping a consistent appearance across doors using visible cylinder fronts.
• The zinc die cast body and cylinder with pin tumbler design deliver a conventional keying interface, which helps installers match existing N Series key systems on projects.
• Key removable in locked or unlocked position supports routines where staff lock or unlock, pocket the key, and move on without leaving a key hanging in the cylinder.
• Two reversible cams that work in all positions allow the same DCN1 lock to be set for different latch directions, which reduces part variation across similar casework.

Installation Fit For 3/4 Inch Material

The Olympus DCN1-10B-103 cam lock is specified for 3/4 inch material thickness, so the cylinder length and cam projection are suited to standard cabinet fronts. The 1 inch face covers splintering around the cylinder bore, reducing the need for a separate trim ring and giving a finished edge around slightly rough holes. This lock has an N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, which ties into established key systems where those keyways are already used. The lock is easily rekeyable via a cylinder retainer clip, so keying can be changed without replacing the entire body. ANSI/BHMA A156.11 Grade 1 performance requirements have been passed, aligning the DCN1 with a high duty-grade cam lock standard for demanding locations.

Cam Lock Role In N Series Installations

Where This N Series Cam Lock Fits Best

This Olympus Lock, Inc. DCN1-10B-103 cam lock fits applications that call for an N Series keyway and 3/4 inch thick faces, tying casework into an N Series master key structure. The keyway is N Series, equivalent to National D4291 4-pin or D4292 5-pin systems, so it can operate with keys cut on those patterns where that system is in place. Stock keying is KD/KA 4 pin standard, while this specific version is keyed alike 103, which aligns all matching cylinders to the KA103 key for simplified access control across multiple doors. The stock KA numbers 101, 103, 107, and 915 give defined groupings, helping planners standardize zones by selected KA codes. Masterkeyed operation uses a 5 pin standard configuration, and grand masterkeyed capability is available, supporting hierarchical key control in larger facilities using N Series keyways.

Why DCN1 Details Support Reliable Operation

The Olympus DCN1 pin tumbler zinc die cast body and cylinder provide a consistent key feel and predictable pin alignment, which matters for users operating locks repeatedly throughout the day. Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, signals that the cam lock has been tested to a demanding performance level important in busy environments. Two reversible cams that work in all positions give one lock body multiple throw options, so installers can orient the cam for clockwise or counterclockwise action, improving fit on left- or right-handed doors. The face diameter of 1 inch covers splintering at the bore edge, giving some tolerance during hole drilling while still hiding minor chipping around the cylinder cut. The lock is rekeyable via the cylinder retainer clip, allowing changes in keying as occupancy or access patterns change without swapping out the core geometry or modifying the door. Standard function with key removable in locked or unlocked position supports both secured and day-use conditions, letting personnel lock up or leave compartments open but still control the keys. The finish range of 26D, 3, 10B, and 19, with this unit in 10B, helps integrators match lock faces across various metal or wood finishes while keeping keying on the same N Series platform.

Buyer Questions About Olympus DCN1 Cam Lock

Selecting This Olympus N Series Cam Lock

The Olympus DCN1-10B-103 pin tumbler cam lock combines an N Series keyway, keyed alike 103 configuration, and a design matched to 3/4 inch material thickness, giving a defined fit for cabinets using that standard build. Its oil rubbed bronze 10B face coordinates with bronze hardware while the 1 inch diameter face covers splintering around the bore. Zinc die cast construction with a pin tumbler cylinder and ANSI/BHMA A156.11 Grade 1 performance alignment supports demanding service. For projects built around N Series keying that need consistent KA103 access on 3/4 inch fronts, this Olympus cam lock sets up a straightforward, repeatable choice.