Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus DCN1 pin tumbler cam lock gives secure keyed control for 3/4 inch material thickness in cabinet and fixture applications. The lock body and cylinder use zinc die cast construction, which provides a solid housing for the pin tumbler mechanism so the cam stays aligned under normal operating loads. The standard function allows the key to be removable in the locked or unlocked position, which lets installers decide whether to leave the cylinder keyed out during adjustments or daily access. Two reversible cams are designed to work in all positions, so the same lock body can operate doors or panels where the cam needs to push or pull. The 1 inch face is sized to cover splintering around the bore, so typical drill breakout on wood faces is hidden without relying on a separate trim ring.
This Olympus DCN1-10B-915 pin tumbler cam lock is designed for 3/4 inch material thickness, so the cylinder length and cam reach are proportioned for common cabinet and fixture stock. The 1 inch face is intended to sit flush on the outside surface, covering the drilled bore so the edge of the hole is not exposed. Because two reversible cams work in all positions, installers can orient the cam to engage strikes or edges without changing the lock body, which streamlines field layout. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, supports standard keying setups where those keyways are already in use.
This Olympus DCN1 pin tumbler cam lock is built as a cam lock for 3/4 inch material thickness, so it suits cabinet doors, drawers, and panels made from that common stock. The oil rubbed bronze 10B finish lets it visually blend with other 10B hardware on casework or architectural millwork, which is useful when locks must match existing trim. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, allows this lock to be keyed together with other N Series locks, so facilities using that system can expand or modify locking points without changing key families. Stock keying as KD/KA 4 pin standard, with stock KA numbers 101, 103, 107, and 915, gives options for keyed different or keyed alike setups within that pin format.
The specific keyed alike 915 configuration on this DCN1-10B-915 lets multiple locks share the same 915 key number, which simplifies key control when several doors or panels need to open with one key. The product has passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, which indicates it has been tested to that cam lock standard for operational cycles and performance. Woodwork Institute acknowledgment identifies it as a product recognized by that body, which supports use on projects that reference Woodwork Institute standards. These identity details matter on commercial and institutional work where specified components must match particular keyways, performance grades, and recognized product lists.
This rekeyable N Series cam lock is easily rekeyable via the cylinder retainer clip, so locksmiths or maintenance teams can change keying within the N Series system without replacing the entire lock body. Masterkeyed capability at 5 pin standard, with grand masterkeyed available, means the cylinder design supports tiered key control where some keys open single locations and others open groups, which is common in multi-door facilities. Being able to key this lock together with other N Series locks allows wider masterkey systems to use a consistent keyway across furniture, cabinet, and fixture points.
The two reversible cams that work in all positions, along with the anti-rotation plate and lost-motion cam shifter described by part designations DCNP-500-ARP and DCNP-200-OCD, support stable cam alignment and controlled movement around the cylinder. The straight cam DCNP-100-SC and offset reversible cam DCNP-100-BC references identify cam shapes that can be used to reach different strikes or frames from the same lock body. These components help the cam stay oriented so the key motion reliably translates into a defined lock or unlock throw on doors or panels built from 3/4 inch stock, reducing adjustments after installation when aligning strikes or keepers.
The Olympus DCN1-10B-915 cam lock uses the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin, so it can align with existing N Series key systems.
The DCN1 N Series cam lock is easily rekeyable via the cylinder retainer clip, allowing key changes within the N Series system while keeping the same lock body in place.
This Olympus cam lock is designed for 3/4 inch material thickness, so its cylinder length and cam reach match common cabinet and fixture stock dimensions.
The DCN1 cam lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, indicating compliance with that cam lock standard.
The 1 inch face covers splintering around the drilled hole, so minor breakout on wood or similar materials is hidden without adding a separate trim ring.
Keyed alike 915 means this Olympus lock is stocked to the 915 KA number, so multiple locks with that designation operate from the same 915 key.
The Olympus DCN1-10B-915 pin tumbler cam lock combines N Series keying, 3/4 inch material design, and an oil rubbed bronze 10B finish, so it fits projects needing coordinated key systems and matching hardware finishes. Its ANSI/BHMA A156.11 Grade 1 performance and Woodwork Institute acknowledgment support use on specified work where those references matter. For cabinet, fixture, or millwork installations using N Series key control and 10B trim, this lock offers a defined keyed alike 915 option within that system.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-915-NP Mfr# KB-915-NP | N Series Cut Key for Keyed Alike #915 |
