Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus Lock DCN3-26D-101 cam lock is a pin tumbler cam lock in the DCN-Series with a 1-7/16 inch cylinder, designed to secure cam-operated cabinet and casework doors where a compact cylinder is needed. The lock uses an N Series keyway that is equivalent to the National D4291 4-pin or D4292 5-pin system, so it fits into N Series masterkey and keying plans. Both the body and cylinder are zinc die cast, giving the assembly a consistent metal construction that supports precise pin tumbler operation. The standard function allows the key to be removable in either the locked or unlocked position, which lets installers match the operating style to existing keyed doors. A 1 inch face covers splintering around the bore, so the cylinder can seat cleanly without a separate trim ring on typical woodwork.
The 1 inch face is designed to cover splintering at the cylinder hole, so installers can drill the casework opening to the proper size and rely on the face to bridge minor edge breakout. Two reversible cams work in all positions, so the same lock body can be oriented to drive the cam for vertical or horizontal applications without changing the cylinder. The standard function keeps the key removable in both locked and unlocked positions, which lets users remove the key after closing or leave it available in the cylinder where that operating style is preferred.
This Olympus N Series cam lock is part of the DCN-Series with a 1-7/16 inch cylinder, so it suits cabinet and casework layouts that accept that cylinder length in a standard cam lock bore. The lock body and cylinder are zinc die cast, providing a unit that matches typical metal cabinet hardware in feel and operation on drawers, doors, or panels that are secured by a rotating cam. The 1 inch face is sized to cover splintering around the installation hole, which helps finished cabinet faces present a clean edge after drilling. The lock is acknowledged by the Woodwork Institute, so it aligns with woodwork specifications that call out that reference for cam locking points.
The lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, which means the cam lock has been tested to that standard for cycle and function under the cam lock grade. That performance level supports use in demanding cabinet or architectural millwork locations that see frequent locking and unlocking. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this lock drop into established key systems without changing keyway families. Stock keying is KD or KA in 4-pin standard, so installations can mix individual keys and keyed-alike groups while staying in the same series. The masterkeyed 5-pin standard and available grand masterkeying extend that structure to tiered access. Rekeying via the cylinder retainer clip allows later changes in keying without removing the full lock assembly from the casework, which supports ongoing key control. Two reversible cams that work in all positions give flexibility to set up different throw directions while using the same tested body and cylinder combination.
The DCN3-26D-101 uses a 1-7/16 inch cylinder, which lets it reach through typical cabinet or casework thicknesses designed for this DCN-Series cam format.
The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin, allows this cam lock to operate within key systems already based on those National keyways.
The DCN3-26D-101 is easily rekeyable via a cylinder retainer clip, so keying can be changed while keeping the same lock body in the casework.
This cam lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, indicating it has been tested for high-use cam lock applications.
The standard function allows the key to be removable in both locked and unlocked positions, which supports different operating preferences at the cabinet.
The 1 inch face covers splintering around the drilled hole, so minor edge breakout is concealed and the cam lock seats cleanly against the surface.
The Olympus Lock DCN3-26D-101 combines a 1-7/16 inch DCN-Series cylinder, N Series keyway, and satin chrome 26D finish, so it matches projects that specify that key family and finish. The ANSI/BHMA A156.11 Grade 1 performance rating supports use on high-cycle cabinet or millwork openings. Rekeying via the cylinder retainer clip and the KD, KA, masterkeyed, and grand masterkeyed structures give flexibility when planning key hierarchies. Use this cam lock where a zinc die cast pin tumbler body, 1 inch face, and two reversible cams provide a consistent solution across related cabinet locking points.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-101-NP Mfr# KB-101-NP | N Series Cut Key for Keyed Alike #101 |
