Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus Lock pin tumbler cam lock gives you a DCN-Series 1-7/16 inch cylinder keyed alike 103 in a satin chrome finish, so you get a consistent key code across locks where KA103 is specified. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, keeps this lock aligned with common N Series masterkey systems on woodworking jobs. The body and cylinder are zinc die cast, providing a solid metal housing that suits typical cabinet and casework environments. This lock has a standard function with the key removable in the locked or unlocked position, which supports workflows where users may need to pull the key after either action. The face has a 1 inch diameter that covers splintering around the bore, so no additional trim ring is required in that area of the installation.
The 1 inch face on this Olympus Lock cam lock is designed to cover splintering at the edge of the bore, so the installer relies on the lock face itself to mask minor tear-out from drilling. Standard function with key removable in the locked or unlocked position lets users lock or unlock the cabinet, then withdraw the key either way to match site procedures. The zinc die cast body and pin tumbler cylinder construction provide a single metal unit that seats into the panel and works with the cams in all specified positions. ANSI/BHMA A156.11 Grade 1 performance rating supports use where a Grade 1 cam lock is required in architectural or woodworking specifications.
The DCN3-26D-103 cam lock uses an N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it integrates into N Series-based keying layouts on cabinets, casework, or similar woodworking fixtures. Stock keying for this Olympus Lock cam lock is KD or KA in 4 pin standard, with stock KA numbers 101, 103, 107, and 915, which anchors it firmly in typical N Series key schedules. The keyed alike 103 configuration means this specific model aligns to the KA103 stock keying option, helpful where that key code is already assigned in a project schedule. Satin chrome 26D finish gives the face a neutral, widely specified appearance that matches other 26D hardware in many commercial interiors. The lock is also identified as a Woodwork Institute acknowledged product, so it aligns with that organization in applicable woodworking contexts.
The pin tumbler cylinder in this Olympus Lock DCN-Series unit provides a conventional pin-based locking mechanism, which supports masterkeyed 5 pin standard and available grand masterkeyed setups where N Series systems are used. The lock is easily rekeyable via the cylinder retainer clip, so cylinders can be reconfigured or rekeyed in the field without changing the entire cam lock assembly, which is useful on sites where key systems evolve. Two reversible cams work in all positions, allowing the installer to select cam orientation to match the swinging or sliding action of the door or panel. An anti-rotation plate and a lost-motion cam shifter are part of the overall cam arrangement, helping keep the cam lock body from turning in the bore while establishing controlled cam travel. Together with the 1 inch face that covers splintering, these details support clean installations and repeatable cam operation.
The DCN3-26D-103 uses an N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it fits into N Series masterkey layouts on cabinet and casework projects.
The Olympus Lock pin tumbler cam lock is easily rekeyable via a cylinder retainer clip, allowing cylinder reconfiguration while keeping the same main lock body installed.
Keyed alike 103 means this DCN3-26D-103 lock is supplied on stock KA# 103, so multiple locks on KA103 operate with the same key code in a keyed alike group.
The Olympus DCN-Series cam lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, aligning it with Grade 1 cam lock criteria in hardware specifications.
The DCN3-26D-103 cam lock is masterkeyed 5 pin standard, with grand masterkeyed capability available, supporting tiered key systems in N Series layouts.
This Olympus Lock cam lock has a standard function with the key removable in the locked or unlocked position, supporting workflows where users remove the key after either action.
The Olympus Lock DCN3-26D-103 pin tumbler cam lock brings a DCN-Series 1-7/16 inch cylinder, N Series keyway, and keyed alike 103 stock keying together for N Series-based cabinet work. With ANSI/BHMA A156.11 Grade 1 performance, zinc die cast construction, and easily rekeyable cylinder via retainer clip, it aligns with demanding woodworking projects using N Series key systems and satin chrome 26D hardware.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-103-NP Mfr# KB-103-NP | N Series Cut Key for Keyed Alike #103 |
