Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus Lock pin tumbler cam lock DCN3-26D-915 is a cam lock with a 1-7/16 inch cylinder that uses a pin tumbler mechanism, so it provides a familiar key feel installers already know from standard keyed hardware. The body and cylinder are zinc die cast, which gives a solid metal construction that stands up to repeated key cycles in cabinet or casework use. This lock has a satin chrome 26D finish, so the face presents a neutral metallic look that suits a wide range of commercial and shop environments. The standard function keeps the key removable in the locked or unlocked position, so users can choose whether they carry the key away after locking or leave it in place when access will be frequent. The DCN-Series design gives a consistent format for projects using multiple Olympus cam locks.
The 1 inch face is sized to cover splintering around the cylinder bore, so the lock face itself hides minor tear-out from drilling without needing any extra trim ring. Two reversible cams work in all positions, so the installer can select cam orientation that matches the door or drawer action without changing the core lock body. The standard function with key removable in locked or unlocked position lets the installer set up the lock for either occasional or frequent access areas while using the same DCN3-26D-915 part number. The zinc die cast body and cylinder give a rigid mounting base, which helps cams track cleanly through their arc when the lock is turned under load.
The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, ties this Olympus Lock cam lock into applications that already rely on N Series control, so one key system can run across matching cam lock points. Stock keying is KD/KA 4 pin standard, with stock KA numbers 101, 103, 107, and 915, so projects using different keyed alike groups can still stay within the same product family. The keyed alike 915 setup on this DCN3-26D-915 version is well suited to runs of doors or drawers where one KA 915 key needs to handle every opening in that group. Woodwork Institute acknowledgment means this cam lock can slot into woodworking-focused projects where WI-recognized hardware is preferred.
The rekeyable design via a cylinder retainer clip helps shops adjust key control over time while continuing to use the same installed lock chassis, which supports long-term maintenance plans. Two reversible cams that work in all positions let installers fine-tune how the locking bar engages strikes or cabinet frames, which reduces the need to modify surrounding material to achieve reliable closure. The 1 inch face that covers splintering also helps preserve a clean finished look around the bore, which matters when locks are installed in visible casework or cabinetry. Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, shows the lock has been tested against a defined cam lock standard, which supports its use in projects where consistent performance is expected. The zinc die cast body and cylinder form a single metal assembly, which supports smooth key turning and cam motion across repeated use cycles.
The Olympus Lock DCN3-26D-915 uses an N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it fits into N Series key control layouts.
The DCN3-26D-915 with keyed alike 915 allows multiple locks to operate from the same KA 915 key, so banks of openings can be managed with a single key.
The DCN3-26D-915 cam lock is easily rekeyable via a cylinder retainer clip, so keying can be changed while keeping the same installed lock body.
The lock passing ANSI/BHMA A156.11 Grade 1 performance requirements means it has been tested to a recognized cam lock standard level for demanding use.
The 1 inch face covers splintering around the drilled hole, so minor tear-out at the bore is concealed without adding a separate trim component.
The two reversible cams work in all positions, so the cam orientation can be chosen to match door or drawer motion while using the same lock body.
The Olympus Lock DCN3-26D-915 combines a 1-7/16 inch pin tumbler cylinder, N Series keyway, and keyed alike 915 setup, so installers can roll out a consistent key plan across multiple cam lock points. Its satin chrome 26D finish, 1 inch face coverage, and reversible cams work together to deliver a clean appearance and flexible cam engagement in cabinet or casework builds. Choosing this rekeyable, ANSI/BHMA A156.11 Grade 1 cam lock lets woodworking and hardware teams align security function, key control, and finish across their project using a single Olympus Lock part number.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-915-NP Mfr# KB-915-NP | N Series Cut Key for Keyed Alike #915 |
