Olympus DCN4 Pin Tumbler Cam Lock, 1-1/2" Material Thickness with 3/4" Bore Diameter, Keyed Alike 101, Oil Rubbed Bronze

Olympus DCN4 Pin Tumbler Cam Lock For Cabinets

Olympus DCN4 pin tumbler cam lock gives a keyed alike 101 solution for installations needing consistent access control across multiple lock points. This matters when building banks of cabinets or fixtures that must all operate with the same key pattern on a job. The lock uses an N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it fits projects already standardized on that key system. Both the body and cylinder are zinc die cast pin tumbler construction, which provides a familiar pin-based key operation that installers can key and service efficiently. The lock is easily rekeyable via a cylinder retainer clip, so cylinder changes can be completed without replacing the entire housing. It passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, supporting use in demanding commercial or institutional woodwork built under Woodwork Institute acknowledged standards.

Key Cam Lock Details That Support Field Work

• The 1 inch face is designed to cover splintering around the bore, so installers can drill the 3/4 inch diameter hole and rely on the face to mask minor edge tear-out on cabinet or fixture panels.
• The face requires no additional trim ring, which simplifies ordering and speeds installation because there is only the primary lock face to seat against the panel surface.
• The standard function keeps the key removable in either the locked or unlocked position, allowing facilities to leave cylinders without a key inserted while still positioning latches as required for daily operation.
• Two reversible cams work in all positions, supporting both left-hand and right-hand layouts as well as vertical or horizontal cam action from the same lock body.
• Stock keying covers both keyed different and keyed alike 4 pin standard arrangements with stock KA numbers 101, 103, 107, and 915 for project-level keying schemes.

Cam Lock Fit, Bore Size, And Thickness Details

This Olympus cam lock is specified for 1-1/2 inch material thickness with a 3/4 inch bore diameter, so it targets cabinet and fixture doors or panels built from thicker stock common in commercial casework. The 1 inch face is designed to fully cover the 3/4 inch bore, which is useful when drilling through laminates or veneered panels where edge chipping must be hidden. The oil rubbed bronze finish, identified as 10B, aligns with dark bronze hardware schemes across a project, helping hardware color remain consistent on visible cabinet fronts. By using a keyed alike 101 configuration, the same key code can serve multiple locks within the N Series system on a run of cabinetry or displays.

How This Olympus Cam Lock Performs In Use

Where The N Series Cam Lock Is Typically Applied

This Olympus DCN4-10B-101 cam lock is part of the N Series keyway family, equivalent to National D4291 4-pin or D4292 5-pin systems, which positions it for use on cabinets and woodwork where that key platform is already in service. The lock body and cylinder are both zinc die cast pin tumbler designs, giving a standard cam lock form that suits doors or panels up to 1-1/2 inch thick. With two reversible cams that work in all positions, the same core hardware supports left-hand, right-hand, vertical, or horizontal cam throw arrangements on a variety of casework layouts. The ANSI/BHMA A156.11 Grade 1 performance rating, equivalent to E07261 and E07271, and Woodwork Institute acknowledgment align it with institutional, commercial, and architectural woodworking projects that reference these standards during hardware selection.

Why Rekeyable, Reversible, And Grade 1 Details Matter

The rekeyable design, achieved via a cylinder retainer clip, lets locksmiths or maintenance staff change keying on site while retaining the installed lock body, which supports key system changes without disturbing casework. Stock keying options, with keyed different or keyed alike 4 pin standard plus stock KA numbers 101, 103, 107, and 915, help align multiple locks under controlled key groups on a project. The standard function that allows key removal in locked or unlocked positions supports procedures where operators lock up and remove keys after use, or leave cabinets unlocked but not tethered to a key. Two reversible cams operating in all positions provide flexibility when aligning latch travel to strikes or keeper plates in different orientations. The 1 inch face that covers splintering eliminates the need for a separate trim ring, simplifying door prep and providing a clean finished edge around the 3/4 inch bore on thicker cabinet doors and panels.

Common Questions About This Olympus Cam Lock

Selecting This Oil Rubbed Bronze Olympus Cam Lock

The Olympus DCN4 pin tumbler cam lock in oil rubbed bronze 10B finish combines keyed alike 101 N Series keying with a 1-1/2 inch material thickness rating and 3/4 inch bore. The 1 inch face hides bore splintering, while reversible cams function in all positions for flexible layouts. Rekeyable pin tumbler construction, ANSI/BHMA A156.11 Grade 1 performance, and Woodwork Institute acknowledgment align it with commercial and institutional woodwork where controlled keying and recognized standards are required. Use this model when an N Series cam lock with oil rubbed bronze appearance and consistent KA101 keying pattern is needed across cabinet or fixture runs.