Olympus DCN4 Pin Tumbler Cam Lock, 1-1/2" Material Thickness with 3/4" Bore Diameter, Keyed Alike 915, Oil Rubbed Bronze

Olympus DCN4 Cam Lock For N Series Jobs

Olympus DCN4 pin tumbler cam lock gives you a keyed alike 915 locking point built around the N Series keyway, so you can match it with other N Series locks and keep key control straightforward across related fixtures. The 1-1/2 inch material thickness rating pairs with a 3/4 inch bore diameter, so it fits jobs already laid out for that common cam lock prep without layout changes. The keyed alike 915 setup means multiple lock positions can operate on the same key, which simplifies access for staff where shared control is needed. The pin tumbler cylinder construction in a zinc die cast body delivers a familiar key feel that suits typical commercial and shop environments. The oil rubbed bronze 10B finish gives a dark, traditional appearance that blends with similar 10B hardware on doors, drawers, or panels.

Key Olympus Cam Lock Details That Save Time

• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, allows this lock to work within existing N Series key systems so you can keep one family of keys across related lock points.
• The easily rekeyable design via a cylinder retainer clip lets you change the keying on site, which helps adapt installations to new key schedules without swapping out the entire lock body.
• Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, establishes a recognized performance level for demanding commercial or institutional service.
• Key removable in locked or unlocked position supports workflows where the operator needs to remove the key while the cam is either securing or releasing the door, drawer, or panel.
• Two reversible cams that work in all positions give you flexibility to orient the cam for different door swings or panel layouts using the same core lock body.
• The 1 inch face that covers splintering eliminates the need for an extra trim ring, which helps clean up slightly rough bores and keeps the visible edge finished in one step.

Cam Lock Fit For 1-1/2 Inch Material Prep

This Olympus Lock, Inc. DCN4-10B-915 cam lock is set up for 1-1/2 inch material thickness with a 3/4 inch bore diameter, so it drops into panels drilled with that standard hole size while still reaching through thicker stock. The 1 inch face sits over the edge of the bore, helping conceal minor chipping from drilling on wood or composite fronts. With a zinc die cast body and pin tumbler cylinder, the lock fits cabinet and fixture construction where a compact body must fit fully inside the bore yet still support the working cams behind the panel. The oil rubbed bronze finish matches other 10B components in the job, tying the lock front into the rest of the visible hardware line.

Using This Olympus DCN4 Cam Lock In Practice

Where The N Series Cam Lock Fits Best

The DCN4-10B-915 cam lock uses the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it fits projects already designed around that key family. The keyed alike 915 stock keying lets multiple lock locations across a run of cabinets or fixtures operate from the same key, which is useful for controlled-access work areas, shared storage, or matching lock points within a single tenant space. The 1-1/2 inch material thickness capability and 3/4 inch bore diameter match common cabinet door and panel build-ups, so it fits typical woodworking layouts using that hole size. With an oil rubbed bronze 10B face, this cam lock works cleanly on dark-finished or bronze-themed casework where the visible hardware needs to stay consistent with other 10B finished parts. The zinc die cast body and pin tumbler cylinder are suited to indoor cabinet, locker, or furniture-style enclosures needing a compact cam action.

Why These Olympus Details Support Repeatable Installs

The Olympus DCN4 pin tumbler cam lock is easily rekeyable via a cylinder retainer clip, so locksmiths or shop personnel can reset the keying when key schedules change while keeping the same cylinder and body in the panel. Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, means the lock has been tested to a defined performance benchmark that supports repeated operation in higher-traffic settings. The standard function with key removable in locked or unlocked position lets the user remove the key after securing or after opening, matching different operational preferences without changing hardware. Two reversible cams that work in all positions allow one lock body to serve vertical, horizontal, left-hand, or right-hand orientations, which simplifies layout on mixed banks of cabinetry. The 1 inch face that covers splintering means the visible front of the lock can tidy up drill breakout on wood or laminate faces, giving a cleaner look without a separate trim component.

Common Olympus DCN4 Pin Tumbler Cam Lock Questions

Select The Olympus DCN4 Lock For N Series Work

The Olympus DCN4 pin tumbler cam lock in oil rubbed bronze brings the N Series keyway, keyed alike 915 stock keying, and ANSI/BHMA A156.11 Grade 1 performance together in a 1-1/2 inch material, 3/4 inch bore format that suits cabinet and fixture work. With its easily rekeyable cylinder retainer clip and reversible cams that work in all positions, this DCN4-10B-915 model helps standardize your N Series locking points while handling varied panel orientations under one part number.