Olympus DCN4 Pin Tumbler Cam Lock, 1-1/2" Material Thickness with 3/4" Bore Diameter, Keyed Alike 107, Oil Rubbed Bronze
Description
Olympus DCN4 Cam Lock For Furniture Security
Olympus DCN4 pin tumbler cam lock is a zinc die cast cam lock built for keyed alike 107 setups in cabinets and similar fixtures. The 1-1/2 inch material thickness rating with 3/4 inch bore diameter coverage targets standard panel builds where a clean front and secure cam action are needed. The oil rubbed bronze 10B finish matches projects calling for that specific appearance while still using the same internal N Series key system. The pin tumbler cylinder layout supports N Series keyway operation that is equivalent to National D4291 4-pin or D4292 5-pin systems, so one key pattern can work across N Series installations. The 1 inch face is designed to cover splintering around the bore, so the front presents as a solid, finished disc without an extra trim ring step.
Key Olympus Cam Lock Details For Daily Use
- The zinc die cast body and zinc die cast pin tumbler cylinder create a rigid cam lock housing that supports repeat locking cycles on cabinet and furniture panels.
- The key removable in locked or unlocked position function lets the user operate doors or drawers either as keyed-only or as a latch-style motion without trapping the key in one state.
- Two reversible cams that work in all positions give flexibility in how the cam engages strikes or frames, so one lock body can adapt to different cam throw directions.
- The 1 inch face designed to cover splintering around the bore helps hide drill tear-out on the show side, saving finish work on many standard 3/4 inch bore cuts.
- The oil rubbed bronze 10B finish ties into projects specified with that finish, keeping visible lock hardware consistent with other bronze-toned components.
Cam Lock Fit For 3/4 Inch Bore Panels
This Olympus cam lock is specified for 1-1/2 inch material thickness with a 3/4 inch bore diameter, so it targets thicker cabinet or fixture doors and panels drilled with that bore size. The 1 inch face overlaps the 3/4 inch hole, covering the bore edge so the front looks clean after drilling. The N Series keyway design, keyed alike 107 in this configuration, lets multiple locks share the same key pattern when they are all set to KA107. The standard function of key removable in both locked and unlocked positions streamlines operation when working around multiple panels, because the key can be withdrawn after either locking or unlocking.
How This Olympus Cam Lock Works On The Job
Where The N Series Cam Lock Is Typically Used
The DCN4-10B-107 cam lock is part of the N Series line that can be keyed together with other N Series locks, which suits installations where several cabinet doors, drawers, or panels need one key pattern. Its 3/4 inch bore diameter specification aligns with standard drilling patterns for many woodworking and casework projects that use bored holes to accept a cam lock body. The 1-1/2 inch material thickness rating allows use on thicker doors or panels, so the same lock style can span a variety of face thicknesses. Because the 1 inch face is designed to cover splintering, the lock front can visually clean up the drill edge on finished surfaces that may show minor tear-out. The oil rubbed bronze finish fits designs calling for that finish code 10B, tying the lock face to other bronze hardware on the same work.
Details That Support Reliable Locking Performance
The zinc die cast body and pin tumbler cylinder provide a stable housing for the cam mechanism, supporting consistent operation around the cylinder and retainer areas. This Olympus lock is easily rekeyable via the cylinder retainer clip, so the same installed hardware can be shifted to a new key pattern without changing the lock body. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin system, ties the lock into a broader keying system that can be masterkeyed as 5 pin standard and grand masterkeyed when configured that way. Stock keying of KD/KA with 4 pin standard and stock KA numbers 101, 103, 107, and 915 gives multiple keying patterns, with this particular lock set to KA107. The standard function that allows key removal in both locked and unlocked positions lets the operator remove the key once the cam has been set to either state, which can streamline movement around casework in use. Two reversible cams that work in all positions mean the installer can orient cam action in several directions using the same lock body, shaping how the cam engages the frame or strike surface.
Common Questions About Olympus DCN4 Cam Lock
What material thickness and bore size does this cam lock fit?
The Olympus DCN4 pin tumbler cam lock is specified for 1-1/2 inch material thickness with a 3/4 inch bore diameter, so it matches panels drilled to that size range in woodworking projects.
How does the keyed alike 107 setup help on a project?
This Olympus cam lock is keyed alike 107 within the N Series, so multiple locks set to KA107 can operate with the same key pattern across grouped cabinets or fixtures.
What key system does the N Series cam lock use?
The cam lock uses an N Series keyway equivalent to National D4291 4-pin or D4292 5-pin systems, which supports keyed alike, masterkeyed, and grand masterkeyed N Series setups.
Can this Olympus cam lock be rekeyed after installation?
The Olympus DCN4 cam lock is easily rekeyable via a cylinder retainer clip, so the installed lock body can be moved to a new key pattern within the N Series system.
What does key removable in locked or unlocked position mean?
This function means the key can be removed when the cam is either locked or unlocked, which lets users leave the lock in a chosen state without the key hanging in the cylinder.
How do the reversible cams benefit installation?
The two reversible cams work in all positions, allowing different cam throw directions and engagement points, which helps match various cabinet layouts using the same lock type.
Select This Olympus Cam Lock For N Series Jobs
The Olympus DCN4-10B-107 cam lock combines an N Series keyway, keyed alike 107 configuration, and zinc die cast pin tumbler construction for casework using 1-1/2 inch thick material with a 3/4 inch bore. Its 1 inch face is designed to cover splintering and present a finished front, while the oil rubbed bronze 10B finish aligns with bronze-toned hardware schemes. For projects where several locks must share the same N Series key pattern and cam orientation flexibility matters, this Olympus cam lock provides those specific, documented capabilities.
