Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/32 inch thick spacer for 7/8 inch diameter lock is an Olympus Lock, Inc. spacer that fills the gap behind specific Olympus cylinders so the lock body sits at the correct height in the panel. The 3/32 inch thickness controls how far the 7/8 inch diameter lock projects, which keeps the cylinder position consistent from cabinet to cabinet when you are using the same lock series. Because this part is designed as a spacer in the Locks and Latches lock accessories category, it supports clean installations where you want the face of the lock to sit flush to the surface rather than sinking into an oversized or deeper cutout. The defined thickness also helps keep the cam or latch relationship predictable relative to the door or drawer edge, which is critical when you are standardizing your layout across a run of casework.
This Olympus Lock, Inc. WP21 spacer is used with 7/8 inch diameter locks so it sits in the lock stack-up around the cylinder when you mount the hardware through a panel or door. The 3/32 inch thickness contributes to how the lock bears against the surface, which influences how tight the assembly feels after you pull the lock against the material. Because it is a spacer in the Locks and Latches family, it works in installations where you want to adjust the relationship between the face of the cylinder and the panel thickness. Using a defined-thickness spacer like WP21 allows you to repeat the same mounting geometry on different cabinets that share the same Olympus lock series.
The Olympus Lock, Inc. WP21 spacer is for use with Olympus lock models 100, 200, 500, 600, L20V, N078, and R078, so it fits applications built around those specific lock series. When you install one of these 7/8 inch diameter locks through a cabinet door, drawer, or panel, this 3/32 inch thick spacer sits in the assembly to control how the lock body relates to the material thickness. That "for use with" listing means shops running those Olympus locks can integrate WP21 into their standard hardware schedule, keeping the same spacer part across multiple projects that specify these model numbers. In practice, this lets you carry a single spacer reference for a range of compatible Olympus cylinders in your cabinet and fixture work.
The defined 3/32 inch thick dimension on this spacer is what sets the separation between the 7/8 inch diameter lock flange and the mounting surface when using supported Olympus models 100, 200, 500, 600, L20V, N078, and R078. That thickness controls how the cylinder shoulder seats, which affects cam or latch reach relative to the cabinet frame in typical lock accessory layouts. Because the spacer is an Olympus Lock, Inc. factory part with manufacturer number WP21, it maintains the intended geometry those lock bodies were designed around, instead of relying on improvised shims. For installers and shops standardizing on these Olympus cylinders, the WP21 spacer supports repeatable results, predictable clearances, and consistent lock feel across doors and drawers built to the same section details.
The WP21 spacer is a 3/32 inch thick Olympus Lock spacer for 7/8 inch diameter locks, and it adds controlled thickness behind the cylinder so the lock seats at a consistent position in the panel.
The WP21 spacer is for use with Olympus lock models 100, 200, 500, 600, L20V, N078, and R078, tying this part directly to those specific cylinder families.
The 3/32 inch thick spacer sets how far the 7/8 inch diameter lock stands off the surface, which influences cylinder projection, cam reach, and overall lock alignment in the cabinet section.
The WP21 part is classified as a spacer in the Locks and Latches lock accessories category, so it functions as a fit-adjustment component rather than the primary locking mechanism.
The 7/8 inch diameter reference indicates the cylinder size this spacer is designed to work with, helping align the spacer opening to the lock body in typical cabinet cutouts.
The Olympus manufacturer part number WP21 identifies this exact spacer in the Olympus Lock, Inc. line, simplifying ordering and matching it to locks 100, 200, 500, 600, L20V, N078, and R078.
The Olympus Lock, Inc. WP21 3/32 inch thick spacer for 7/8 inch diameter lock is specified for use with Olympus models 100, 200, 500, 600, L20V, N078, and R078, so it ties directly into those lock schedules. Its defined 3/32 inch thickness in the Locks and Latches lock accessories category gives you a predictable way to set lock stand-off and panel relationship around that 7/8 inch diameter cylinder. When a project calls out these Olympus locks and you want consistent geometry across doors and drawers, selecting the WP21 spacer aligns the installation with the manufacturer's intended stack-up.
Sold In: 1 Each