1/2 inch thick spacer for 1-1/8 inch diameter locks describes a dedicated Olympus Lock, Inc. part designed to build up material thickness around specific cylinder bodies, which helps installers adapt standard locks to panels that need that extra 1/2 inch of stand-off. The 1/2 inch thickness gives a predictable offset between the lock face and mounting surface, which supports consistent key engagement across similar jobs. The spacer is classified under lock accessories and spacers, so it fills the hardware gap between the lock body and the cabinet or drawer material where that space is needed. The manufacturer part number 10-349 identifies this exact spacer pattern, which matters when repeating successful lock layouts or matching existing hardware schedules. Being branded by Olympus Lock, Inc. ties this part directly to their lock families, so it suits workflows already standardizing on those locks.
The spacer thickness of 1/2 inch works with 1-1/8 inch diameter locks, so layout can be planned knowing that the lock face will stand that distance off the primary surface, which helps in controlling backset and cam reach. When used in cabinet or drawer construction, this thickness can bridge the gap where the panel alone is too thin to position the cylinder body as desired, supporting a smoother key action. Because it is a spacer in the locks and latches class, it sits between the lock and the mounting area, giving a defined shim that replaces improvised build-ups. Aligning with 1-1/8 inch diameter locks also keeps the installer focused on a known cylinder size, simplifying drill bit selection and template use.
The spacer for 1-1/8 inch diameter locks is specified for use with Olympus series 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72, so it sits directly in projects that standardize on those cylinders. Using a spacer that is matched to these part families gives a consistent interface where the lock body meets the panel, which supports uniform handle feel from door to door. In cabinet environments where these Olympus series are already laid out in schedules, this spacer integrates into that same system, so the relationship between lock face and door or drawer front stays repeatable. As a member of the lock accessories category, it fills that specific role of creating a controlled stand-off at each lock location.
The 1/2 inch thick designation tells installers exactly how much material the spacer adds behind a 1-1/8 inch diameter lock, which keeps the cylinder projection consistent and reduces trial fitting. With series such as 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72 all referenced, this single spacer can be specified across multiple Olympus lock types, streamlining hardware lists. The defined thickness helps maintain cam or latch alignment relative to cabinet frames, as the lock body sits at a predictable depth when this spacer is used. Referencing manufacturer part 10-349 in drawings and work orders gives a clear signal to the field that this is the 1/2 inch solution for those 1-1/8 inch diameter Olympus locks.
The 1/2 inch thick spacer is for use with Olympus lock series 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72, so it supports those specific cylinder families in projects.
The spacer is designed for 1-1/8 inch diameter locks, so it fits around that cylinder size and helps position those locks correctly relative to cabinet or drawer faces.
The Olympus Lock, Inc. spacer 10-349 is 1/2 inch thick, which adds that fixed build-up behind the 1-1/8 inch diameter lock to control the lock face stand-off.
The 1/2 inch thickness provides a consistent offset between the lock and mounting surface, which supports repeatable drilling patterns and predictable cam reach in cabinet installations.
The 10-349 part is a spacer in the locks and latches lock accessories class, so it serves as a hardware shim positioned with the lock assembly.
The Olympus Lock, Inc. branding ties this spacer to their 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72 locks, supporting consistent fit within that lock system.
The 1/2 inch thick spacer for 1-1/8 inch diameter locks with part number 10-349 gives a defined build-up for Olympus series 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72, so cabinet and casework jobs using those locks can maintain consistent cylinder depth and layout. Choosing this spacer as the standard for those series helps align shop drawings and field installs around one known thickness for that 1-1/8 inch lock body.
Sold In: 1 Each