Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1/8" Thick Spacer for 1-1/8" Diameter Locks provides a consistent 1/8 inch thickness behind Olympus 1-1/8 inch diameter locks, which helps set the lock body at the correct depth in the prepared hole so cams and latches line up with the strike. As a spacer from Olympus Lock, Inc., it is designed as part of the manufacturer-approved system, which gives installers a part that follows the same dimensions and tolerances as the locks it supports. The spacer belongs to the Locks and Latches lock accessories class, so it fills a specific role in cabinet and casework lock assemblies where an extra 1/8 inch stand-off is required between the lock face and mounting surface.
As a spacer designed for Olympus 1-1/8 inch diameter locks, this part sits between the lock body and the mounting surface, which keeps the cylinder face in a consistent position relative to the finished panel. The 1/8 inch thickness changes the effective reach of the lock tailpiece or cam, which is especially useful when the standard lock projection would overshoot or fall short of the strike point. Because it is a dedicated spacer from Olympus Lock, Inc., it follows the lock body footprint, so installers can align it quickly within the bored hole without altering the basic drilling pattern.
Manufacturer part number 10-350 is specified for use with Olympus models 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72, so it supports a wide range of cylinder and cam lock bodies from the same brand. Using a spacer matched to these models helps keep the lock face and trim projection uniform across doors, drawers, and panels that share these Olympus locks, which simplifies layout on large banks of casework. When the same 1-1/8 inch diameter lock family is used on mixed material thicknesses, the 10-350 spacer allows the installer to keep using those specified locks while adjusting only the stand-off dimension behind the cylinder. Because it is listed as a spacer within the Olympus lock accessories class, it is intended to participate directly in these lock stacks rather than acting as a generic shim.
The fixed 1/8 inch thickness lets installers predict exactly how far an Olympus 1-1/8 inch diameter lock will project from the panel once the spacer is added, which reduces trial-and-error when setting cam reach on multiple doors or drawers. In practice, this consistent offset helps the cam or latch from Olympus models 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72 engage the strike or frame in the same way, even when panel thickness varies slightly between cabinets. Because the spacer is part of the same Olympus Lock, Inc. system, its dimensions support repeatable fitting, so an installer can rely on the 1/8 inch value when laying out lock centerlines and strike locations. That repeatability helps keep lock keyways visually aligned and reduces rework when matching multiple lock openings in commercial or institutional millwork using this hardware combination.
The 1/8" Thick Spacer for 1-1/8" Diameter Locks with part number 10-350 is for Olympus models 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72, keeping installations within that lock family.
The 1/8 inch thickness moves the Olympus 1-1/8 inch diameter lock body outward by that amount, which changes cam reach and helps align the locking point with the cabinet or drawer strike.
The spacer is specified as a 1/8" Thick Spacer for 1-1/8" Diameter Locks, so it targets Olympus cylinders in that diameter range for predictable seating in the bored hole.
The spacer sits with the Olympus 1-1/8 inch diameter lock body, adding a 1/8 inch stand-off, so the cylinder face and cam position better match the cabinet material thickness.
Part number 10-350 identifies this item as an Olympus Lock, Inc. spacer, which ties it to the specified 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72 lock models.
The spacer is in the Locks and Latches lock accessories class, so it functions as a supporting component that fine-tunes how Olympus 1-1/8 inch diameter locks sit in the cabinet.
The 1/8" Thick Spacer for 1-1/8" Diameter Locks from Olympus Lock, Inc. gives installers a defined 1/8 inch adjustment point for Olympus 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72 cylinders. When a project calls for those 1-1/8 inch diameter locks across varying panel conditions, this spacer helps align lock faces and cam reach using a simple, repeatable component from the same lock accessories family.
Sold In: 1 Each