1/4" Thick Spacer for 1-1/8" Diameter Locks from Olympus Lock, Inc. is a dedicated spacer that works with 1-1/8 inch diameter locks, so installers can adapt lock positioning while staying within the intended cylinder size. The 1/4 inch thickness sets a consistent offset, which helps keep lock faces aligned when mounting through varying panel or door conditions. As a spacer in the Locks and Latches, Lock Accessories category, it plays a supporting role behind the lock body but directly affects how cleanly the lock sits in the finished surface. The 10-348 manufacturer part number clearly identifies this spacer when matching jobsite needs to documentation or reorders. By using a spacer designed specifically for 1-1/8 inch diameter locks, installers maintain a predictable stack of components that supports repeatable results.
The 1/4" Thick Spacer for 1-1/8" Diameter Locks contributes directly to how a lock mounts through a panel, because its thickness becomes part of the total stack of components on the lock body. With a fixed 1/4 inch thickness, installers can account for this dimension when selecting lock length and planning the order of parts on the cylinder. Since the spacer is intended for 1-1/8 inch diameter locks, its opening and outside geometry relate to that cylinder size, which supports a centered fit around the lock barrel. In practice, this helps the lock sit square in the hole while tightening the mounting nut, aiding alignment between the exterior face and the interior engagement parts.
The 1/4" Thick Spacer for 1-1/8" Diameter Locks is specified for use with Olympus models 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72, so it fits directly into projects built around these lock families. When these lock series are used in cabinet doors, drawers, or casework, the 10-348 spacer can be placed on the lock body to adjust the effective stand-off as part of the assembly. Because the spacer is part of the Locks and Latches category and classed as a spacer, it supports the primary locking function by positioning the cylinder relative to the panel, without changing the lock model itself. This is particularly relevant in jobs that repeat the same Olympus lock series across multiple openings with different material conditions.
The 1/4 inch thickness on the 10-348 spacer directly influences how much thread and cylinder length remain available beyond the mounting surface for Olympus 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72 locks, which affects how the mounting nut engages. Because the spacer is matched to 1-1/8 inch diameter locks, it supports the lock barrel evenly, which helps the cylinder stay centered and reduces the chance of twist while tightening. Consistent spacer thickness also allows installers to repeat the same lock layout across multiple openings that share these Olympus models, supporting predictable alignment between the lock face and strike or cam action. In replacement work that uses these same Olympus models, referencing manufacturer part 10-348 keeps spacer selection aligned with existing lock specifications and job records, which supports straightforward rework or expansion using like-for-like components.
The 1/4" Thick Spacer for 1-1/8" Diameter Locks supports 1-1/8 inch diameter locks, so it works within installations built around that specific cylinder size.
The spacer is for use with Olympus 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, and L72 locks, tying directly into those product families.
The Olympus Lock, Inc. 10-348 spacer is 1/4 inch thick, allowing installers to factor that fixed dimension into the lock assembly stack on the cylinder.
The 1/4" Thick Spacer for 1-1/8" Diameter Locks acts as a spacer in the lock assembly, positioning the cylinder relative to the mounting surface.
This spacer is identified as Olympus Lock, Inc. manufacturer part 10-348, which ties it to documentation and reorder references.
The part belongs to the Locks and Latches category, in the Lock Accessories product class as a spacer, indicating its supporting role in lock installations.
The 1/4" Thick Spacer for 1-1/8" Diameter Locks gives installers a defined 1/4 inch adjustment point around 1-1/8 inch diameter cylinders while staying aligned with Olympus lock geometry. When projects specify Olympus 700, 721, 754, 777, 800, 850, 854, 888, 931, 950, L92, or L72 locks, choosing manufacturer part 10-348 from Olympus Lock, Inc. through Wurth Baer Supply ties the spacer directly to those lock families and supports consistent lock positioning across similar openings.
Sold In: 1 Each