Link 360 cable manager kit is a patent-pending multi-directional cable manager designed for height-adjustable mechanisms, so cables travel cleanly as the work surface moves. The kit uses Link 360 elements stacked together, which creates a guided path that helps keep wires organized between the work surface and the floor. Wires and cables are routed from the work surface down through the Link 360 elements to the weighted foot, which stabilizes the run at floor level. The system is flexible, so it can accommodate vertical movement and slight offsets at the base of the table. This kit is rated for height-adjustable mechanisms up to 51 feet, which fits tall sit-stand and extended-range bases within that travel. The white finish supports clean-looking cable management where exposed components need to blend into light workstations.
The Link 360 cable manager kit routes wires from the work surface down to the weighted foot, so installers can establish a clear start and end point for cable paths on height-adjustable mechanisms. When the kit is clipped to the table leg with the Link 360 clip using magnet or tape, the elements track along the leg, which keeps movement aligned with the base structure. The ability to run free-standing means the column can stand near the leg or pedestal when direct attachment is not preferred, giving layout flexibility around different base geometries. Using all 45 Link 360 elements allows installations up to 51 feet of travel, which covers vertical motion on most height-adjustable table systems built within that range.
The Link 360 cable manager kit is described for use with height-adjustable mechanisms, so it fits sit-stand desks and adjustable workstations needing controlled vertical cable routing. Wires and cables feed from the work surface through the Link 360 elements to the weighted foot, so the main path suits power blocks, data lines, and equipment leads that must travel with the top. The ability to attach the Link 360 cable manager to a table leg with a clip using either a magnet or tape means it works along metal legs or surfaces that accept taped clips, which helps in retrofits where drilling is not part of the plan. Because the system is flexible and multi-directional, it can follow slight offsets between the work surface exit point and the floor contact point, which is useful around crossbars, feet, or uneven base components that shift the ideal cable line.
The use of 45 Link 360 elements in each kit creates a repeatable segment count, so installers can build a consistent cable column height from project to project. The kit rating for mechanisms up to 51 feet defines the maximum vertical travel it is designed to support, which helps match the column length to desks and stations that fall within that movement range. The multi-directional behavior of the Link 360 elements lets the column bend as needed while still guiding the cables, so the cable path can be tuned around leg profiles or foot designs without introducing sharp kinks at any single point. Routing wires downward to a weighted foot at the base adds mass at the bottom of the column, which helps the elements return toward a straight vertical line after movement. The option to run the Link 360 cable manager free-standing provides a repeatable solution when attachment locations are limited, because the same element count and weighted base still define the path even without a leg mount. The white color supports consistent visual alignment when matching other white or light workstation components, which helps maintain a unified look across multiple adjustable tables using the same cable manager kit.
The Link 360 cable manager kit is designed to route wires from the work surface down to a weighted foot on height-adjustable mechanisms, keeping cables guided as the table moves.
The Link 360 cable manager kit can be used for height-adjustable mechanisms up to 51 feet, matching installations that operate within that vertical travel range.
The Link 360 cable manager can be attached to the leg of the table base by using a Link 360 clip with a magnet or tape, allowing mounting along suitable leg surfaces.
The Link 360 cable manager supports free-standing use, so the cable column can stand near the base while still guiding wires from work surface to floor.
The Link 360 cable manager kits use 45 Link 360 elements, a quad connector, a dumbbell connector, and a foot assembly to form the continuous cable path.
The Link 360 cable manager kit is from Custom Accents and is identified by manufacturer part number CPF-75362M for ordering and project documentation.
The Link 360 cable manager kit from Custom Accents combines a multi-directional element design, a weighted foot, and mounting options using a magnet or tape clip, so it supports organized cable routing on height-adjustable mechanisms up to 51 feet. The defined element count and rated travel help align projects around a repeatable solution when consistent workstation layouts are needed. For installs where a white, flexible cable column suits the leg design and motion range, this Link 360 cable manager kit offers a clear way to route cables from work surface to floor in a controlled path.
Sold In: 1 Kit