Link 360 cable manager kit provides a multi-directional cable manager designed for height-adjustable mechanisms, so cables track with the moving work surface instead of hanging loose. The kit uses Link 360 elements stacked together, creating a vertical cable pathway that scales to the required height. Wires and cables are routed from the work surface down through the elements to the weighted foot at the bottom, which keeps the run tidy and helps hold the column in position. The Link 360 system is patent-pending, reflecting a purpose-built design for moving table bases. This kit supports height-adjustable mechanisms up to 51 inches, so it covers a wide range of sit-stand and adjustable workstations. The translucent finish allows visual confirmation of cable routing while keeping the installation cleaner and more organized than open cable runs.
The Link 360 cable manager kit can operate as a free-standing cable column, so it can sit at the base of height-adjustable mechanisms where a leg connection is not preferred. The Link 360 system can also be attached to the leg of a table base by using a Link 360 clip with a magnet or tape, giving a choice of leg-mounted or floor-standing routing paths. Attaching to the leg keeps the cable run closer to the structure, while free-standing use allows positioning near the travel path of the mechanism. This kit length is specified for height-adjustable mechanisms up to 51 inches, which ties the installation range directly to the movement capability of many adjustable bases.
The Link 360 cable manager kit is designed for use with height-adjustable mechanisms, so it is suited to adjustable tables, workstations, and similar applications where the work surface moves vertically. Cable routing starts at the work surface, passes through the stacked Link 360 elements, and terminates at the weighted foot, which sits at the floor near the base. This vertical pathway fits environments where devices, power, and data are located on or above the work surface and must travel with it as height changes. Because the system is multi-directional, the element chain can curve slightly as needed to line up with table legs or base components while still maintaining a defined cable path. The kit provides capacity for installations up to 51 inches in adjustment range, aligning with many standard sit-stand and lift mechanisms.
The patent-pending Link 360 multi-directional design allows the cable manager column to articulate as the height-adjustable mechanism raises and lowers, which supports smoother cable movement and reduces sharp bends. Using individual Link 360 elements to build the column means the installer can match the cable manager height to the specific travel of the table within the 51 inch capability, helping avoid excessive slack or tension. Routing wires down to the weighted foot anchors the end of the cable path, which helps the column track predictably during motion instead of drifting. The option to attach the Link 360 chain to a table leg with a clip using a magnet or tape gives flexibility in how closely the cable path follows the base structure. The translucent material makes the internal cable layout visible, which simplifies diagnosing snags or planning additional runs while keeping a cleaner appearance than exposed loose cables under the work surface.
The Link 360 cable manager kit creates a guided cable path for height-adjustable mechanisms, so cables travel from the work surface to the floor while staying organized as the table moves.
The Link 360 cable manager kit can be used for height-adjustable mechanisms up to 51 inches, which aligns the element column length with common sit-stand table travel ranges.
The Link 360 cable manager can attach to the leg of a table base by using a Link 360 clip with a magnet or tape, positioning the cable path directly along the leg structure.
The Link 360 cable manager kit can be used free-standing, so the cable column can sit near the base of the height-adjustable mechanism without a leg connection.
The Link 360 cable manager system is described as multi-directional because its elements flex as the height-adjustable mechanism moves, helping guide cables through vertical motion and slight alignment changes.
The translucent Link 360 design lets you see cable routing inside the manager, which helps with tracing runs and evaluating space when modifying or expanding under-desk wiring.
This Link 360 cable manager kit from Custom Accents is specified for height-adjustable mechanisms up to 51 inches, giving a defined range for adjustable tables and workstations. The multi-directional, translucent Link 360 elements route cables from the work surface to the weighted foot, organizing power and data through the full travel of the mechanism. With options for either leg-mounted or free-standing use, the kit adapts to different base designs while keeping cable runs controlled. For projects needing a repeatable cable management layout on adjustable stations, this Link 360 configuration under manufacturer part CPF-75364M provides a consistent, job-ready solution.
Sold In: 1 Kit