Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is Blum's MOVENTO heavy-duty undermount slide in the 30 inch length — a fully concealed, full-extension runner with integrated BLUMOTION soft-close, rated 155 lb per pair, for drawer boxes with 1/2 to 5/8 inch sides.
At 30 inches, this MOVENTO slide addresses the longest, heaviest-loaded drawers in a typical cabinet run — pots-and-pans base drawers, deep pantry pull-outs, appliance garages, utility drawers stocked with tools, and oversized bathroom vanity drawers that carry more weight than a standard 90 to 110 lb undermount can handle comfortably. The 155 lb per pair rating puts this well above the standard MOVENTO class, so the slide stays in spec even when the drawer is loaded to the back of its 30 inch depth. Full extension means none of that content is stranded behind the cabinet face — the entire box comes forward when the drawer is opened.
MOVENTO runs on a roller-bearing carriage housed in formed steel members with a zinc finish. The zinc coating handles years of indoor service without degrading the slide's smooth travel. Because the slide mounts entirely beneath the drawer box, the finish stays hidden in use — the hardware serves function rather than appearance. BLUMOTION soft-close is engineered directly into the slide body, not clipped on as an afterthought, so damping behavior is consistent across the full load range. For 30 inch drawers at this capacity, that consistency matters: a heavy drawer that decelerates unevenly will eventually rattle loose a clip-on damper, while the integrated mechanism holds its calibration.
Cabinet shops running premium residential kitchen projects reach for this slide when a client's design calls for deep, open-concept drawers at base-cabinet depth — the kind that need to hold cast iron cookware, small appliances, or a full set of drafting or woodworking tools without any sense of strain. It also suits commercial millwork shops building banquette seating bases, reception desk pedestals, and work-surface storage where load cycles are high and load weights are real. Homeowners tackling a high-end remodel who want the same slide a pro would specify will find it equally at home in a kitchen renovation. This slide is for indoor cabinet work; it is not rated for exterior or wet-environment applications.
The 155 lb rating is per pair, which is how all undermount slide capacities are stated in this catalog. Each installed drawer uses one pair — so a single 30 inch drawer can carry up to 155 lb of contents within the rated spec.
Yes. In a face-frame cabinet, the slide's rear end needs support behind the frame. Use the MOVENTO-series rear mounting brackets — brackets are series-specific and do not interchange with TANDEM or other Blum lines. The brackets are sold separately.
The drawer box must be built to Blum's published specification for the MOVENTO series: nominal 30 inch length, the correct box width based on the 3/16 inch side clearance, a bottom recess, and a rear notch for the slide's rear end. An off-spec box will not seat correctly on the slide.
MOVENTO front locking devices are series-specific Blum accessories. Confirm whether they are included with this SKU or sold separately before placing your order, and do not substitute locking devices from other Blum lines — TANDEM and MOVENTO clips are not interchangeable.
The 30 inch nominal length matches a 30 inch drawer box depth, not the drawer's width. Drawer width is independent of slide length. Wide drawers at this length run without issue — MOVENTO does not have a stated maximum width in this application, though very wide drawers may benefit from an anti-rack solution if the cabinet construction calls for one.
Pair this 30 inch MOVENTO slide with a properly built drawer box and the correct series hardware for your cabinet construction, and the heaviest drawers in the project will open as smoothly as the lightest ones.
Sold In: 1 Set
