Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf drip tray is a sink cabinet drip tray made to protect a sink cabinet from minor leaks. This Rev-A-Shelf under sink organizer is part of the SBDT Series drip tray line and is sized at 40-1/2 inches wide x 23-1/4 inches long x 3/4 inch high. The tray holds 1.75 quarts of water and comes in an almond finish. Buyers looking at mats, basins, or a cabinet leak tray for a sink base can use this product to add a contained layer inside the cabinet. Product data notes that this tray is recommended for new cabinetry, and installation may be difficult after the sink and countertop are already installed.
Key specs to confirm: This sink cabinet drip tray is listed at 40-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high, with a 1.75 quart water capacity. Before purchase, confirm your cabinet interior footprint, plumbing location, and whether obstructions inside the sink base will affect placement. Because the product is recommended for new cabinetry and may be difficult to install after the sink and countertop are installed, buyers should also confirm installation timing. If you need safety, compliance, load, or other technical details beyond the verified dimensions and water capacity, those details should be confirmed with the manufacturer or technical documentation.
What's included: Verified data identifies the product as one Rev-A-Shelf SBDT Series almond drip tray. Other included items are not specified and should be confirmed before ordering.
What to verify before ordering: Check cabinet inside width and depth, confirm the tray footprint works around supply lines and drain parts, verify almond is the desired color, and confirm whether your cabinet is new construction or already has the sink and countertop installed.
A sink base is one of the most common places for small plumbing leaks to go unnoticed. A sink cabinet drip tray gives that area a contained surface so minor drips are easier to spot before they spread into the cabinet bottom. This Rev-A-Shelf drip tray is intended to protect a sink cabinet from minor leaks, which makes it a practical choice for kitchen and bath cabinet projects where buyers want a simple under sink organizer rather than a complex insert.
The listed size of 40-1/2 inches wide by 23-1/4 inches long matters most for buyers fitting a large sink base cabinet. If your cabinet interior is smaller, has center supports, or has plumbing lines placed low along the bottom, you should confirm the clear opening and usable floor area before ordering. The 3/4 inch height and 1.75 quart capacity tell buyers this is a shallow containment tray for minor leaks, not a deep basin for major water events. That distinction is useful when comparing mats, basins, and cabinet leak tray products for under-sink use.
This SBDT Series drip tray is also a good fit for remodel planning. Product data specifically says it is recommended for new cabinetry. That means installers and serious DIY buyers should think about when the tray goes in. If the sink and countertop are already installed, access may be tighter and installation may be more difficult. In a new cabinet build, that issue is easier to manage because the cabinet interior is open before final plumbing and top installation.
Buyers searching for undersink pull-out systems sometimes need a simpler protective layer instead of a moving organizer. In that case, this under sink organizer product class may fit the job if the goal is cabinet protection from small leaks. If the project includes pull-outs, waste systems, or added accessories, verify that the tray dimensions still leave enough room for those components. Verified data does not state compatibility with other accessories, so that should be checked before purchase.
When comparing a sink cabinet drip tray to flat mats or deeper basins, the main differences usually come down to containment style, fit, and install timing. This Rev-A-Shelf under sink organizer provides a defined tray with a stated 1.75 quart capacity, which gives buyers a clear reference point for minor leak containment. A flat liner may cover a surface but may not provide the same contained edge. A deeper basin may hold more water, but buyers should still confirm whether it fits the cabinet footprint and plumbing layout.
The value in this product is its clear, verified specification set. Buyers know the finish is almond, the size is 40-1/2 inches by 23-1/4 inches by 3/4 inch, and the intended use is protection from minor leaks in a sink cabinet. That makes it easier to match the tray to a cabinet build sheet or field measurement. The Rev-A-Shelf brand and SBDT Series naming also help buyers identify the exact product type when reordering or matching similar trays across multiple jobs.
For trade buyers, consistency matters. A named series and manufacturer part number help reduce confusion during purchasing, especially when several cabinet sizes or color options are being reviewed. For homeowners and installers, the main point is to confirm that this almond drip tray fits the cabinet floor and can be installed at the right stage of the project. If your application needs more than minor leak protection, or if you need verified accessory compatibility, those details should be confirmed before the order is placed.
Rev-A-Shelf drip tray is used to protect a sink cabinet from minor leaks under the sink area.
This sink cabinet drip tray is 40-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high.
This almond drip tray holds 1.75 quarts of water for minor leak containment.
This under sink organizer is recommended for new cabinetry, and installation may be difficult after the sink and countertop are installed.
This cabinet leak tray fits only where the cabinet interior and plumbing layout can accept the listed tray dimensions.
This tray may be difficult to install after the sink and countertop are installed, so project timing should be confirmed first.
The Rev-A-Shelf SBDT Series drip tray in this listing is almond.
Included items beyond the tray are not specified in the verified data and should be confirmed before ordering.
This under sink organizer requires confirmation of cabinet floor space, plumbing clearance, install timing, and the desired almond finish. Follow manufacturer installation guidance and local building requirements where applicable.
Almond drip tray is a practical choice when you need a defined sink cabinet drip tray for minor leak protection. Before purchase, confirm the 40-1/2 inch by 23-1/4 inch footprint, 3/4 inch height, and 1.75 quart capacity against your cabinet interior and plumbing layout. Verified data identifies this item as a Rev-A-Shelf SBDT Series tray in almond, but other included components are not specified. Check installation timing carefully, especially if the sink and countertop are already installed.
Sold In: 1 Each
