Salice Thick Door Hinge for Flush Inset Doors

This Salice Series 200 hinge is engineered for thick cabinet doors installed at a flush inset position, covering both face-frame and frameless cabinet construction. Its 94 degree opening angle and full-crank arm geometry are sized specifically for the geometry thick inset doors require.

Key Features

• Thick door engineering accommodates doors that exceed the standard concealed-hinge thickness window.
• Inset overlay positions the door flush inside the cabinet opening with an even reveal on all sides.
• 94 degree opening angle is the correct swing geometry for a thick inset door to clear the opening without binding.
• Self-close spring pulls the door shut over the final degrees of travel.
• Dowel mount presses the cup into pre-bored dowel holes for a tool-free, production-ready door-side installation.
• Height and side adjustment dials doors to an even reveal after the cabinet is set.

Where the 94 Degree Angle Does Its Job

A thick door is a different problem than a standard door. The extra material pushes the door face forward, and without geometry designed for it, the door edge collides with the cabinet front as it swings. The 94 degree opening on this hinge is not a restriction — it is the engineered limit that lets the thick door clear the opening cleanly. Pair that with the inset position, where the door sits inside the opening rather than over it, and precise fit is the whole game. This hinge handles both in one part. The 35mm cup bores into the door, and the arm connects to a Salice base plate mounted to the cabinet, ordered separately.

Steel Build in a Nickel Finish

The hinge is plated steel in a nickel finish. Dowel mounting drives the cup into pre-bored 8mm dowel holes in the door without cup screws, which speeds production and keeps the cup seated consistently from door to door. Height and side adjustment stay accessible after the door is hung, so an even reveal across a run of inset doors is a matter of dialing in rather than refitting.

Right for Production and Custom Work Alike

This hinge suits shops doing any volume of thick inset doors on face-frame or frameless cabinets. CNC-bored doors drop straight onto the dowels for repeatable positioning. Custom builders working one piece at a time get the same advantage: no cup screws to seat, and adjustment that holds the reveal once it is set. For standard-thickness doors, a standard concealed hinge is the better fit. For thick doors at a full overlay position, a different arm geometry is needed. This hinge is specifically for thick inset.

Common Questions

Thick Inset Doors, Done Correctly

Specify this hinge when the project calls for thick doors at a flush inset position, and the install needs to go in fast and stay square.