Soft-Close Thick Door Hinge For Flush Inset Openings

This Salice Series 200 Logica hinge is built for thick cabinet doors set to a flush inset position, with integrated Silentia soft-close and toolless mounting for both face-frame and frameless cabinet boxes.

Key Features

• Thick door design accommodates doors beyond the standard 16 to 22mm range that standard concealed hinges cannot properly seat.
• Inset geometry with full crank arm positions the door flush within the cabinet opening with an even reveal on all sides.
• Silentia soft-close damps the door quietly over the final degrees of closing, protecting the tight tolerances an inset fit requires.
• 94 degree opening angle provides the controlled swing that lets a thick door clear the cabinet face without binding.
• Toolless Logica clip-on attaches the arm to the base plate without a screwdriver, speeding up door hanging and removal.
• Works on both face-frame and frameless cabinets when paired with the appropriate Salice base plate, sold separately.

The Right Hinge When Door Thickness and Inset Meet

Standard concealed hinges are engineered for doors 16 to 22mm thick. Push past that window and the cup geometry no longer positions the door correctly, especially on an inset application where the door must sit flush and square inside the opening. This hinge is designed for that exact condition: a thick door that needs to land inset. The 35mm cup bores into the door with a 15.5mm cup depth, seating deeper than a standard hinge to accommodate the added thickness. The arm then clips to a Salice base plate mounted to the cabinet, ordered separately. Because inset work depends on precision, the 94 degree opening angle is intentional: it is the geometry that lets a thick door swing clear of the cabinet front without collision, not a shortcoming.

Steel Construction With a Finish That Travels

The hinge is plated steel in a Nickel finish. Nickel reads as a neutral, professional tone that coordinates with a wide range of hardware finishes across kitchen, bath, and built-in casework. The Silentia damper is integrated into the hinge body, so there is nothing to add or retrofit later. Side adjustment of plus 4.5mm and minus 1.5mm, combined with plus or minus 2mm of height adjustment, gives enough range to bring doors to an even reveal after the cabinet is set and settled.

Who Reaches for This Hinge

This is a specialist pick for cabinetmakers and installers working with thick-door construction, furniture-grade casework, or premium European-style boxes where a flush inset door is the design intent. It suits face-frame shops and frameless production lines alike, as long as the pairing Salice plate matches the cabinet type. Homeowners renovating with solid, heavy doors and designers specifying an inset look for high-end projects will find this hinge resolves the overlap between thick material and flush aesthetics. For standard-thickness doors in the same inset configuration, a standard inset hinge is the correct choice.

Common Questions

Thick Doors, Flush Result, Quiet Close

When the design calls for a thick inset door that lands flush and settles quietly, this hinge handles all three conditions in one part.