Nickel Thick Door Hinge for Inset Applications

This Salice Series 200 Silentia hinge mounts inset doors on thick-door cabinet boxes, bringing soft-close performance to flush-set doors on both face-frame and frameless cabinets.

Key Features

• Thick door design handles the deeper cup and modified arm geometry that standard hinges cannot manage on heavier door stock.
• Inset geometry with full crank arm positions the door flush inside the cabinet opening with an even reveal on all sides.
• Silentia soft-close damps the door over the final degrees of closing, protecting the tight tolerances an inset fit demands.
• 94 degree opening angle gives the door the clearance it needs without overswinging on a thick panel.
• Screw-on mount fastens directly to the cabinet without a quick-release clip, for a firm, permanent connection.
• Works on face-frame and frameless cabinets with the same hinge body and a matching Salice base plate, sold separately.

Built for Thick Doors Set Flush

Thick doors require a cup and arm geometry that a standard concealed hinge cannot deliver. The deeper 35mm cup seats fully in the door without breaking through, and the arm geometry is calibrated for the added mass and edge thickness that would push a standard arm out of alignment. Pairing that with an inset configuration means the door sits inside the opening rather than over it, framed by a small, even gap on every edge. The 94 degree swing is the correct angle for this application: it gives the door clearance to open fully without the thick panel catching the cabinet front on its way out.

The hinge clips to a Salice base plate mounted to the cabinet, ordered separately. Plates are brand-specific, so use a Salice plate matched to your cabinet construction and the overlay position this hinge requires.

Steel Build in Nickel, Held Together by Soft-Close

The hinge body is plated steel in a nickel finish. On an inset door, the soft-close mechanism does more than add a premium feel: it prevents the door from contacting the opening at speed, which is what keeps tight reveals intact over time. Silentia damps the door through the last few degrees so it settles into the opening rather than slamming into it. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm to minus 1.5mm let you true up the reveal after install without removing the door.

Where This Hinge Belongs

Specify this hinge when a project calls for thick doors finished flush with the cabinet face, on either frameless box construction or traditional face-frame cabinetry. It suits custom cabinet shops building furniture-grade pieces where door thickness is part of the design, and finish carpenters who need a hinge that handles heavier door stock without compromising the inset look. For standard-thickness doors in the 16 to 22mm range, a standard Series 200 inset hinge is the appropriate choice. This hinge is for interior cabinetry.

Common Questions

Flush Doors, Firm Mount, Quiet Close

When thick doors need to sit flush and close without impact, this hinge delivers the geometry, the damping, and the adjustment to make it work on either cabinet type.