Dowel-Mount Thick Door Hinge for Flush Inset Doors

This Salice Series 200 hinge is built for thick doors that need to sit flush inside the cabinet opening, on both face-frame and frameless cabinets, with a dowel mount that presses into the door's pre-bored holes for a clean, screw-free cup installation.

Key Features

• Thick door geometry provides the cup depth and arm clearance a door over standard thickness needs to close without binding.
• Inset full-crank arm positions the door flush inside the cabinet opening with an even reveal on all sides.
• Dowel mount cup presses into pre-bored dowel holes, eliminating cup screws for a faster, cleaner door-side install.
• 94 degree opening angle is the engineered swing for thick doors, giving the clearance needed without overextending the arm geometry.
• Self-close spring pulls the door shut automatically over the last few degrees of travel.
• Three-way adjustment dials in height, side, and depth after the door is hung, bringing the reveal even across a run.

What This Hinge Is Built For

Thick doors require more than a standard cup. The deeper cup and modified arm geometry here give the door room to clear the cabinet front as it swings, which is what the 94 degree opening angle reflects. That angle is not a restriction — it is the correct engineering for a thick door in an inset position. A wider swing on this geometry would put the door into the cabinet carcass. The 35mm cup bores into the door as usual, and the dowel mount means the cup presses in with no cup screws to drive, which speeds the door-side operation on a CNC or production run. A separate Salice base plate mounts to the cabinet and the arm slides on to connect. That plate is sold separately and must be a Salice plate matched to your cabinet construction — frameless wing or face-frame style depending on the box.

Steel Build in a Nickel Finish

The hinge is plated steel in a nickel finish. Inset work puts the hinge geometry on display at the reveal, so consistent finish matters across a run of doors. On an inset door, the self-close spring also does real work: it pulls a closely fitted door away from the jamb and into the latch position without the user having to push the last inch. The three-way adjustment — plus or minus 2mm in height, plus 4.5mm or minus 1.5mm in side — keeps that gap even after the cabinet is set and the wood moves with the seasons.

Where This Hinge Belongs

This is the right hinge when the design calls for an inset door on a thick panel, and the install workflow runs through CNC boring with dowel holes ready in the door. It works on frameless and face-frame cabinets alike, so it fits production shops running both box types without needing a separate SKU for each. Custom cabinet shops doing furniture-grade inset work with heavier door stock will also find the geometry correct. For doors in the standard 16 to 22mm thickness range, a standard concealed hinge is the better fit. If the project calls for a damped, cushioned close rather than a spring pull, look to the Silentia+ soft-close version of this series.

Common Questions

Inset Doors on Thick Stock, Done Right

When the job calls for flush inset doors on heavier door panels — on frameless or face-frame cabinets, through a CNC workflow — this Salice Series 200 hinge delivers the correct geometry, a press-in cup install, and the adjustment to keep every reveal even.