Nickel Thick Door Hinge for Dowel-Mounted Face-Frame and Frameless Cabinets

The Salice 200 Series C2RBD99 is a thick door concealed hinge designed for doors that exceed the standard 22mm thickness, with a self-close spring and dowel mounting on both face-frame and frameless cabinets. The 94-degree opening angle is engineered for the clearance a thick door needs to swing free without binding against the cabinet front.

Key Features

• Thick door geometry accommodates doors beyond the standard 16 to 22mm range, where a standard cup would not seat correctly.
• 94-degree opening angle delivers the swing that lets a thick door clear the cabinet face without collision.
• Self-close spring pulls the door shut over the last few degrees of travel.
• Dowel mounting presses pre-mounted dowels into bored holes in the door for a fast, screw-free cup attachment suited to CNC and production lines.
• Half crank arm at 1/2 inch overlay positions the door at a partial overlay, the geometry used when two doors share a center partition.
• Three-way adjustment provides height and side movement after the door is hung to bring reveals into alignment.

Where Thick Doors Need a Different Hinge

A standard concealed hinge is engineered for doors 16 to 22mm thick. Push beyond that range and the cup geometry no longer seats correctly, the arm hits the cabinet face before the door closes flush, and the door binds. This hinge solves that by pairing a 35mm cup with arm and cup-depth geometry matched to thick stock. The 94-degree swing is not a limitation but the correct engineering: a thick door needs a tighter arc to clear the cabinet front cleanly, and this hinge delivers exactly that arc. It mounts to a Salice base plate on the cabinet, ordered separately, and works on both frameless side panels and face-frame stiles.

Steel Construction in a Nickel Finish

The hinge body is steel finished in nickel. Salice's 200 Series is a production-oriented workhorse line built around consistent geometry and reliable spring performance across high-volume installs. The dowel mount carries that same production logic to the door side: instead of driving cup screws into each door, the pre-mounted dowels press into bored holes, which keeps cycle time down on a CNC line. Post-hang, height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm to minus 1.5mm let you true up reveals without pulling the door.

Right for Production and Custom Shops Running Thick Stock

Cabinet shops building thick-door furniture pieces, custom bath vanities with heavy slab fronts, or any run of doors over standard thickness will find this hinge the correct fit for the application. It suits face-frame and frameless boxes equally, so a shop working both constructions can stock one part for thick-door work across the lineup. Designers specifying thick door profiles on modern or transitional pieces get consistent, quiet self-close behavior without needing a specialty soft-close upgrade. This hinge is for indoor cabinetry; for applications where a damped, cushioned close is required instead of a spring pull, look to the Silentia+ soft-close version of this series.

Common Questions

Thick Doors Hung Right, the First Time

When the door spec calls for heavy stock and a partial overlay on face-frame or frameless boxes, this hinge gives you the geometry, the swing clearance, and the production-ready mounting to get the job done without rework.