Thick-Door Geometry And Full Overlay Fit

This Salice Series 200 hinge is engineered for thick cabinet doors, delivering full overlay coverage on both face-frame and frameless cabinets with a self-close spring and screw-on mounting.

Key Features

• Thick-door design accommodates doors beyond the standard 16 to 22mm range that a conventional concealed hinge cannot seat correctly.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving a narrow reveal.
• Self-close spring draws the door shut over the last few degrees of travel so it latches without manual effort.
• 94 degree opening is the engineered swing for thick-door applications, giving the door the clearance it needs to pass the cabinet front without binding.
• Screw-on mounting fastens directly to the cabinet side or face-frame stile with wood screws, no system holes required.
• Height and side adjustment lets you dial in an even reveal after the door is hung.

Built for Doors That Standard Hinges Cannot Handle

When a door exceeds roughly 22mm in thickness, a standard concealed hinge cup will not seat it properly. The cup geometry on this Salice Series 200 hinge is sized and shaped for thick doors, so the cup seats fully and the arm geometry carries the door without the stress or misalignment that comes from forcing a standard hinge onto the wrong application. The 35mm cup bores into the back of the door in the usual position, and the arm connects to a separate Salice base plate mounted to the cabinet, sold separately. The 94 degree opening is not a limitation here; it is the correct angle for thick-door work, providing the swing the door needs to clear the cabinet front cleanly rather than colliding with it on the way out.

Steel Construction With Screw-On Simplicity

The hinge is plated steel in a nickel finish. Screw-on mounting is straightforward on any cabinet that does not carry pre-drilled 5mm system holes, and it is a reliable connection on face-frame stiles where a tool-free press-in plate would have nothing to grab. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm to minus 1.5mm give you the alignment range to bring thick doors to a clean, consistent reveal after the cabinet is in place.

Where This Hinge Belongs

Specify this hinge on frameless or face-frame cabinets with doors that run thicker than the standard window. It suits cabinet shops building thick-slab fronts, designers working with heavy solid-wood doors, and remodelers replacing hinges on existing thick-door installations where a standard hinge repeatedly fails to sit right. Because this is a self-close hinge, the spring pulls the door shut but does not cushion the close. For a project where a damped, quiet close is the priority, the Silentia+ soft-close version of the Series 200 is the right specification instead. Use Salice base plates; plates are brand-specific and a plate from another brand will not connect to this arm.

Common Questions

The Right Hinge Keeps Thick Doors Hanging True

Pair this Salice Series 200 thick-door hinge with the matching Salice base plate for full overlay doors that close on their own and stay square, even when the door stock goes beyond what a standard hinge can hold.