Self-Close Thick Door Hinge for 1/2 Inch Overlay Applications

This Salice Series 200 hinge is engineered for thick cabinet doors on both face-frame and frameless cabinets, bringing a 1/2 inch overlay and a self-closing spring to door stock that standard concealed hinges cannot handle.

Key Features

• Thick door geometry handles door stock that falls outside the standard 16 to 22mm window, where a regular hinge cup would not seat correctly.
• Self-closing spring draws the door shut automatically over the last few degrees of travel.
• 94 degree opening angle is the correct engineered swing for thick doors, giving clearance without the door binding on the cabinet front.
• 1/2 inch overlay, half crank arm positions the door at a partial overlay, including two doors sharing a center partition.
• Screw-on mounting fastens the hinge directly to the cabinet with wood screws for a straightforward, secure connection.
• Height and side adjustment lets you dial in an even reveal after the cabinet is assembled.

Built for Doors That Exceed the Standard Thickness Range

When a door is thicker than the standard 16 to 22mm window, a regular concealed hinge cup will not seat properly, and the arm geometry will not carry the door where it needs to go. This hinge is built specifically for thick doors, with a cup and arm geometry sized to match that stock. The 35mm cup bores into the door at the correct depth, and the 94 degree opening is the angle that lets a thick door clear the cabinet front cleanly without binding. At that angle the door swings wide enough for practical everyday access while the thicker stock stays in its lane. The hinge clips to a base plate mounted to the cabinet, ordered separately, matched to your cabinet construction and compatible with this Salice series.

Steel Construction in a Nickel Finish

The hinge body is plated steel finished in nickel. Screw-on mounting provides a direct, screw-locked connection between the arm and the cabinet, which is the right call for thick, heavier doors where a firmer anchor matters. After installation, height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm to minus 1.5mm let you bring doors into a consistent reveal without pulling the hinge and starting over. The self-closing spring is straightforward: once the door is within a few degrees of closed, the spring takes over and pulls it home.

Where This Hinge Belongs

Reach for this hinge when the specification calls for a thick door on either a frameless or face-frame cabinet, at a 1/2 inch overlay. It suits the two-door layout where a pair of doors meets on a shared center partition, each overlapping by about half an inch. Cabinet shops building painted or veneered thick-door fronts, designers specifying furniture-quality cabinetry with heavier door stock, and contractors replacing worn hardware on existing thick-door runs will all find it fits the job. Because this is a self-close hinge and not a soft-close hinge, the spring pulls the door shut but does not cushion the final contact. For projects where a damped, quiet close is the requirement, look to the Salice Silentia+ soft-close version of this series.

Common Questions

The Right Hinge for Thick Doors That Need to Close Every Time

When the door stock is heavier than a standard hinge can carry, this Salice Series 200 thick door hinge delivers the geometry, the overlay, and the self-closing spring to keep the job moving and the doors closing on their own.