CompX National Padlock Cam Lock For Cabinets

CompX National padlock cam lock is a cam style locking mechanism that uses a padlock as the locking device, so the cylinder stays keyless while security is handled by the padlock you already use on site. The satin nickel finish provides a clean, neutral look that suits a wide range of cabinetry and casework where appearance still matters in finished installs. The lock fits applications with up to 1-1/8 inch maximum material thickness, allowing use on many cabinet doors and panels built from common stock sizes. A 3/4 inch barrel diameter sets the boring requirement, giving installers a clear drill size for consistent hole preparation. The mechanism accepts padlocks up to 3/8 inch shackle diameter, with 5/16 inch recommended, which helps match common padlock sizes used on jobs and maintain smooth operation. The product sits in the CompX National cam locks class, aligning it with established cabinet hardware standards.

Key Details That Support Lock Performance

• The cam style locking mechanism uses a padlock as the locking device, so the cam simply provides rotation while the padlock supplies cut resistance and lets users standardize on their preferred padlock system across multiple cabinets.
• The 1-1/8 inch maximum material thickness rating allows the cam lock to serve on many cabinet doors and panels, helping installers cover typical casework built from standard thickness sheet goods without re-engineering the door design.
• The 3/4 inch barrel diameter defines the hole size, so boring operations can be set up with the correct bit for repeatable fits, which supports faster, more accurate production runs in the shop or on site.
• The ability to accept padlocks up to 3/8 inch shackle diameter, with 5/16 inch recommended, helps match common padlock dimensions so field crews can use standard locks while still achieving a snug, reliable interface with the cam body.
• The satin brushed nickel finish coordinates with many hinge and pull finishes, letting hardware on the project present a unified appearance while still delivering the functional rotation and engagement needed at the cam.

Mounting And Fit Details For Installers

This padlockable cam lock fits a 3/4 inch barrel diameter bore, giving installers a clear drilling target for both new cabinet builds and retrofit work. The design fits doors or panels with a maximum material thickness of 1-1/8 inch, so layout can confidently follow typical cabinetry construction without extra laminating or thinning at the lock area. A mounting plate for wood applications is part of the design, allowing the lock body and cam to seat securely in wooden cabinet structures. One 1-5/8 inch straight cam is specified, so the reach and engagement are defined for planning strikes or contact points on the cabinet frame. The cam lock uses a detent washer and rotation stop, which control how far the cam turns and help the handle position repeat every time the lock is operated.

Using This Padlock Cam Lock In Real Projects

Where This Cam Lock Fits Cabinet Work

This CompX National padlock cam lock sits in the cam locks category for locks and latches, placing it squarely in cabinet and casework applications. The 1-1/8 inch maximum material thickness rating means it works on many common cabinet doors, drawer fronts, and access panels built from standard sheet stock or panel materials. A 3/4 inch barrel diameter simplifies planning for drilling operations in both production shops and on-site retrofits, since a single bore dimension handles the lock body. The included 1-5/8 inch straight cam length defines how far the cam reaches behind the door, helping installers position strikes or cabinet frames so the cam fully engages when rotated. A mounting plate tailored for wood applications ties the lock assembly securely into wood structures, supporting repeated use in cabinets that may be opened and closed many times during daily operation.

Design Details That Support Repeatable Results

The cam style locking mechanism that uses a padlock as the locking device keeps the cylinder keyless, so the same external padlock key system can control multiple cabinets, simplifying key control across a facility. Acceptance of padlocks up to 3/8 inch shackle diameter, with 5/16 inch recommended, establishes a usable range that matches common padlock stock, helping avoid binding while still giving a tight, confident shackle fit through the cam lock opening. The set 3/4 inch barrel diameter lets fabricators set up jigs and drilling fixtures for volume work, reducing layout time and helping every lock seat consistently in its bore. Flexa Cam spacers in three thicknesses are part of the system, and they serve to ensure a proper fit between the cam and the engaging surface, which reduces play and helps the cam land reliably where it needs to for secure locking. A detent washer and rotation stop are specified, so the arc of travel is controlled and the handle position is repeatable, which is especially useful when multiple doors must align visually. The satin brushed nickel finish contributes to a professional appearance on visible cabinet fronts, supporting projects where both function and presentation are important.

Common Questions About C8010-15 Cam Lock Use

Selecting This Cam Lock For Your Project

The CompX National padlock cam lock C8010-15 gives installers a cam style locking mechanism that pairs with standard padlocks, combining keyless hardware with shackle-based security. With a 3/4 inch barrel diameter and 1-1/8 inch maximum material thickness rating, it matches common cabinet drilling and construction methods. Acceptance of padlocks up to 3/8 inch shackle diameter, and a recommended 5/16 inch size, aligns the lock with widely used padlocks in the field. The satin brushed nickel finish and wood-focused mounting plate support both appearance and solid seating in wood casework. For projects needing a padlockable cam lock that fits typical cabinet dimensions, this C8010-15 configuration from Wurth Baer Supply is ready to drop into planned layouts.