Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Padlockable cam lock matte black is a cam style locking mechanism that uses a padlock as the locking device, so the lock body mounts to the door while the padlock controls access. The CompX National padlock cam lock works as a keyless 90 degree solution, which lets the cam rotate a quarter turn to engage or release the strike. This padlock cam lock fits 1-1/8 inch maximum material thickness, allowing use on many standard cabinet and door constructions in that range. A 3/4 inch barrel diameter seats the lock in a properly sized hole, helping the body stay stable once installed. The lock accepts padlocks up to 3/8 inch shackle diameter, so common padlock sizes can be used. A 5/16 inch shackle diameter is recommended, giving a practical target size when selecting the padlock.
This CompX National padlock cam lock uses a 3/4 inch barrel diameter, so installers drill that size hole and seat the body for a snug, correctly aligned fit. The design fits 1-1/8 inch maximum material thickness, so doors or panels in that range can be prepared without extra build-ups. A mounting plate for wood applications provides a defined interface when installing in wood, helping the cam lock bear load against the panel. Flexa Cam spacers are supplied in three thicknesses, which lets installers adjust the cam reach so the straight cam meets the strike location cleanly. A detent washer and rotation stop work together to set the 90 degree action, positioning the cam positively at open and closed positions so operation stays predictable.
The CompX National padlock cam lock, matte black, is designed for applications where a cam style mechanism is needed but access is controlled by a separate padlock. Its 1-1/8 inch maximum material thickness capacity means it suits many cabinet doors, panels, and similar structures built within that thickness range. The 3/4 inch barrel diameter gives a clear drilling requirement, so layouts on wood or comparable materials can be repeated across multiple openings. Because the lock accepts padlocks up to 3/8 inch shackle diameter, with 5/16 inch recommended, it fits common padlock choices often used in shops, institutional settings, or storage areas. The straight 1-5/8 inch cam provides a defined reach from the lock center, which helps align with strikes or frame edges in typical door and panel geometries.
This 90 degree keyless cam lock design allows the cam to travel only a quarter turn, which helps keep handle motion consistent so users feel a clear open and closed stop every time. The supplied 1-5/8 inch straight cam establishes a predictable throw length from the barrel centerline, making repeated layouts across multiple doors more efficient. Three thicknesses of Flexa Cam spacers are provided to fine-tune the cam stand-off, so the cam face can land accurately against the mating surface for reliable engagement. The mounting plate for wood applications offers a stable bearing surface for the lock body, which supports long-term alignment under repeated use. A detent washer and rotation stop control the arc of travel, which helps the cam park at the intended positions and reduces over-rotation that could otherwise affect how the latch meets its strike. These combined details work together so once an installer dials in the cam position, that setup can be duplicated across similar openings.
The CompX National padlock cam lock uses a cam style locking mechanism that relies on a padlock as the locking device, so the cam body stays fixed while the padlock controls access.
The padlock cam lock fits 1-1/8 inch maximum material thickness, allowing use on many cabinet doors and panels built within that thickness range.
This cam lock uses a 3/4 inch barrel diameter, so a 3/4 inch round hole is required to seat the lock body in the panel.
The padlockable cam lock accepts padlocks up to 3/8 inch shackle diameter, with 5/16 inch shackle diameter recommended for practical pairing.
The C8010-18 padlock cam lock is a keyless 90 degree design, so the cam turns a quarter rotation between open and closed positions.
Flexa Cam spacers in three thicknesses adjust the cam stand-off, so the straight cam can be positioned to meet the strike surface accurately.
The CompX National C8010-18 padlock cam lock, matte black, combines a 3/4 inch barrel diameter with fit for 1-1/8 inch maximum material thickness, which suits many cabinet and panel builds. Its 90 degree keyless motion, 1-5/8 inch straight cam, and Flexa Cam spacers work together so the locking point can be set precisely. A mounting plate for wood applications supports solid installation in wood substrates. When a cam style lock body that uses a padlock as the locking device matches your project requirements, this padlockable cam lock provides a focused, material-specific option.
Sold In: 1 Each
