Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX National padlock cam lock uses a cam style locking mechanism that works with a separate padlock as the locking device, so you can match it to the padlock key system already used on the job. The cam lock has a bright nickel finish, which provides a clean, finished look on visible cabinet or casework fronts. The design accepts padlocks up to 3/8 inch shackle diameter, with 5/16 inch recommended, giving flexibility to use common padlock sizes while keeping the hasp engagement snug. This cam lock fits applications with up to 1-1/8 inch maximum material thickness, so it suits many cabinet doors, drawers, or panels built in that range. A 3/4 inch barrel diameter gives a standardized hole size, which helps layout and drilling stay consistent across multiple installations.
This padlockable cam lock fits up to 1-1/8 inch maximum material thickness, so it can be mounted through many standard cabinet doors or case fronts without altering panel build-ups. The 3/4 inch barrel diameter sets the required hole size, streamlining layout on drill jigs or CNC programs. A 1-5/8 inch straight cam is provided in the design, so the locking throw length is established for typical cabinet door edge engagement. The cam lock uses a padlock as the locking device, so once the barrel and cam are installed, securing the door is handled by inserting a compatible padlock shackle through the cam opening.
The C8010-14A padlockable cam lock from CompX National is suited to doors or panels up to 1-1/8 inch thick, so it fits many cabinet, locker, or casework fronts built to that thickness range. The 3/4 inch barrel diameter supports use in wood applications where a clean round bore can be drilled in stile or panel locations. A mounting plate for wood applications is part of the design, tying the lock body solidly to the panel so the cam can engage reliably. The bright nickel finish works well in environments where visible hardware should match other bright metal components, such as hinges or pulls with similar finishes.
This padlock cam lock uses a cam style locking mechanism that works with a padlock up to 3/8 inch shackle diameter, with 5/16 inch recommended, so the shackle seats properly in the cam opening for repeatable locking. Three thicknesses of Flexa Cam spacers are part of the configuration, allowing the straight cam position to be tuned so it meets the strike point correctly on different door or frame offsets. A 1-5/8 inch straight cam length sets a predictable reach, which helps align the cam with strikes or frame edges during layout. The design also references a detent washer and a rotation stop, which provide positive positioning of the cam travel so the open and closed positions remain consistent over multiple cycles.
The C8010-14A padlock cam lock fits up to 1-1/8 inch maximum material thickness, so it suits many cabinet or panel constructions built in that range.
The padlockable cam lock uses a 3/4 inch barrel diameter, so the required bore is sized to accept that barrel across doors or panels.
The cam style locking mechanism accepts padlocks up to 3/8 inch shackle diameter, with 5/16 inch recommended for a more snug fit in the cam opening.
The 1-5/8 inch straight cam provides a defined reach from the barrel center, helping the cam meet the frame or strike point on typical cabinet layouts.
Three thicknesses of Flexa Cam spacers let the installer adjust the cam position, so the locking surface can meet the mating edge without binding or excess gap.
The mounting plate for wood applications supports the lock body on the panel, helping distribute load and keep the cam aligned with the door edge or frame.
The CompX National padlock cam lock C8010-14A brings a cam style locking mechanism that uses a padlock as the locking device, so it works well where keyed padlocks are already standard. With fit for up to 1-1/8 inch maximum material thickness and a 3/4 inch barrel diameter, it aligns with many cabinet and casework builds. The bright nickel finish lets it sit cleanly alongside other bright metal hardware. For woodworking and cabinet projects that need a padlock-ready cam solution, this model from Wurth Baer Supply delivers a defined, repeatable setup.
Sold In: 1 Each
