NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2136SMB1XUF1 to RSR2136SMB1XUF1.
Omega National 36" Paintable Signature Straight Wall Mount Range Hood is a wood range hood designed for wall mounting in kitchen projects. The paintable construction lets the installer finish the hood to match surrounding cabinetry, which helps create a unified look in custom or semi-custom kitchens. The straight wall mount layout defines a fixed footprint over the cooktop, which supports consistent layout planning across 30", 36", 42" and 48" widths. The hood uses Omega National Products standard Signature hood chimneys, so installers working on multiple runs can plan around a single chimney family. The 36" width focuses on common cooktop spans, helping cabinet installers coordinate adjacent wall cabinet sizing and spacing. This configuration provides a defined structure for integrating ventilation while keeping the visible surfaces ready for finish work.
This Omega National wood range hood installs using a standard French cleat hanging system, so the installer engages a familiar wall-mount method when setting the unit. The cleat approach lets the hood be set onto a fixed reference board, supporting repeatable vertical and horizontal positioning across similar jobs. The silver metallic liner is designed to accommodate all Broan ventilation, giving a defined cavity layout for aligning duct connections and Broan blower placement. The same liner accommodates all Sirius ventilation, which helps the installer work within a known interior metal shell when routing ventilation for Sirius units. Across 30", 36", 42" and 48" widths, the straight wall mount form keeps the mounting plane consistent, which simplifies measuring clearances and relating the hood centerline to base cabinets and cooking equipment.
This Omega National Products wood range hood is part of the Signature straight wall mount family, so it fits kitchen layouts that call for a defined wood focal point over the cooking surface. The 36" width targets common cooktop and range sizes, which helps align the hood centerline with standard 30" range placements when flanked by wall cabinets or panels. Because the hood is paintable, it can be finished to match door styles, face frames, or trim, supporting projects where the hood needs to read as part of a continuous cabinet run. The design is categorized under wood range hoods and Kitchen & Bath Cabinet Accessories, connecting directly to cabinet shop workflows. Using the same standard Signature hood chimneys across 30", 36", 42" and 48" widths lets designers specify different spans while maintaining a coordinated chimney look. The silver metallic liner that accommodates all Broan ventilation, and also accommodates all Sirius ventilation, supports projects built around those ventilation brands while using a wood shell for the visible structure.
The straight wall mount geometry provides a predictable installation plane, which is useful when aligning the hood with tile terminations, upper cabinet bottoms, or valances. The French cleat hanging system gives the installer a set wall reference, which supports accurate placement and can streamline the process of leveling the hood with neighboring cabinets. Within the hood, the silver metallic liner creates a defined metal interior that accommodates all Broan ventilation, helping maintain a consistent fit between the blower housing and the wood shell. That same liner accommodates all Sirius ventilation, so cabinet and mechanical trades can coordinate around a single interior form factor when either brand is specified. The Signature designation ties this hood to Omega National Products standard Signature hood chimneys, which means chimney sizing and styling can remain consistent while the hood width changes from 30" to 48". For shops planning multiple kitchens or repeating a design, that standardized approach supports smoother layout drawing, cutting lists, and finishing schedules.
The R2136SMB1XUF1 is a 36" paintable Signature straight wall mount wood range hood from Omega National Products, so it serves as a wall-mounted wood hood body for kitchen ventilation layouts.
The French cleat hanging system provides a fixed wall-mounted support strip, which allows the installer to hang the hood on a stable reference and align it with surrounding cabinets or finishes.
The silver metallic liner accommodates all Broan ventilation and all Sirius ventilation, so the wood hood body can be paired with blower units from those brands inside the liner cavity.
The paintable wood construction allows finishing the hood to match or coordinate with surrounding cabinetry, which supports integrated kitchen designs where the hood reads as part of the cabinet run.
The available 30", 36", 42" and 48" widths share the Signature design, which lets planners choose a width that matches the cooking surface while keeping the overall hood style consistent.
The hood uses standard Signature hood chimneys, so chimney selection and detailing stay consistent across different hood widths, which can simplify design coordination and finishing work.
This Omega National 36" paintable Signature straight wall mount range hood offers a wood hood body that integrates with standard Signature hood chimneys, so it fits cabinet-focused kitchen projects. The silver metallic liner accommodates all Broan ventilation and all Sirius ventilation, giving mechanical trades a defined metal interior for blower placement. With widths from 30" to 48" sharing the same Signature family, it aligns with layouts that repeat a consistent hood style at different spans. For jobs needing a paintable wood hood that works with Broan or Sirius ventilation, this model provides a clear, specification-driven option.
Sold In: 1 Each