Omega National 36"W Hickory Signature Straight Wall Mount Range Hood, Broan Compatible Liner Included - R2136SMB1HUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2136SMB1HUF1 to RSR2136SMB1HUF1.

Omega National 36 Inch Hickory Signature Hood For Kitchens

Omega National 36 inch Hickory Signature Hood gives you a straight wall mount wood range hood in a 36 inch width, so it fits standard cooking areas where a wooden focal point is needed. The flat valance design creates a straight, clean front, which helps the hood sit neatly over cooking surfaces and line up visually with surrounding cabinets. Hickory construction provides a matching option for hickory kitchens, which keeps the hood visually tied to the rest of the run. As a wood range hood, it pairs with compatible ventilation components rather than acting as a blower itself, so the hood becomes the finished enclosure in a multi-part system. The R2136SMB1HUF1 part number identifies this 36 inch, flat valance, hickory configuration, which matters when matching other Signature hood components or planning repeat jobs.

Key Range Hood Details That Support Installation

• Available in 30, 36, 42, and 48 inch widths, this Signature hood family lets you size the wood hood to match different cooktop spans, so you can keep a consistent look across varying cabinet runs.
• Use of standard Signature hood chimneys means this 36 inch base section ties into the same chimney system as other Signature models, which simplifies layout, ordering, and repeat installations on multiple kitchens.
• The silver metallic liner is designed to accommodate all Broan ventilation units, giving you a ready interior surface sized for Broan inserts so the mechanical side and the decorative wood shell work together.
• Compatibility with Sirius ventilation inside the same silver metallic liner provides another supported ventilation option, which helps cover different project standards while keeping the same wood exterior.
• The hood installs using a standard French cleat hanging system, so the body mounts on a wall-hung cleat that supports the load while allowing you to lift, engage, and seat the hood during installation.
• Listing as a wall mount range hood places this unit on the wall above the cooking surface, which aligns it with standard wall cabinet layouts in kitchen designs.

Mounting And Liner Details For Straightforward Setup

The hood uses a standard French cleat hanging system, which means you fasten a cleat to the wall and then hang the hood on that cleat, making it easier to carry, position, and seat the hood at height. As a wall mount range hood, it is intended to be fixed to the wall above a cooktop area, aligning with typical wall cabinet runs so the front edge and flat valance sit in line with adjacent cabinetry. The silver metallic liner is built to accommodate all Broan ventilation units and Sirius ventilation, so once the hood body is secured, the interior gives a defined space for installing those ventilation components. Using the same Signature hood chimneys across sizes keeps the transition from hood body to chimney consistent on layouts that mix different widths.

How This 36 Inch Hickory Hood Works In Kitchens

Where The Hickory Signature Hood Is Typically Used

This 36 inch hickory Signature hood sits in the wood range hood category, so it is intended for kitchen projects where a wooden hood is specified instead of a metal shell. Being a straight wall mount range hood, it fits above a cooking surface on a wall, tying into surrounding wall cabinets and upper runs. The flat valance front gives a straight-line look that suits cabinet lines calling for a simple lower hood profile, which can be important on long runs or around decorative doors. Hickory construction supports use in hickory cabinet kitchens, keeping species and grain consistent. With widths available in 30, 36, 42, and 48 inches across the same Signature hood family, you can match the visual style as you move between smaller and larger cooking zones.

Why The Liner, Chimneys, And Cleat Matter In Use

The silver metallic liner that accommodates all Broan ventilation and Sirius ventilation creates a defined interior for those systems, which streamlines fitting fans and duct transitions inside the wood shell. Because the liner is designed around these ventilation options, you work with a known interior geometry instead of improvising a cavity, which helps with predictable cutout and duct alignment. Use of standard Signature hood chimneys means once you select this R2136SMB1HUF1 36 inch flat valance version, you can pair it with the same chimney components you use on other Signature hood widths, simplifying both design elevation drawings and future replacements. The standard French cleat hanging system supports the hood body from a wall-mounted cleat, which lets you lift and engage the hood without holding its full weight during fastening. As part of Omega National Products wood range hoods, this model fits the broader Signature system, so the combination of chimney, hood body, liner, and supported ventilation options works together as a coordinated installation.

Common Questions About The 36 Inch Hickory Signature Hood

Choose This Hood For Hickory Signature Installations

This Omega National 36 inch Hickory Signature Hood combines a straight wall mount wood range hood body, a flat valance front, and a silver metallic liner for Broan and Sirius ventilation, so it fits hickory Signature layouts where a 36 inch wood hood and coordinated components are required. Using the standard French cleat hanging system and Signature hood chimneys, it supports a repeatable installation method for projects that rely on the broader Signature hood family. For kitchen runs using hickory cabinets and specified Broan or Sirius ventilation, this 36 inch model aligns the wood exterior and interior liner into one planned solution.