NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2136SMB1QUF1 to RSR2136SMB1QUF1.

Omega National 36 Inch Alder Range Hood For Kitchens

Omega National 36 inch alder range hood is a wood range hood designed for wall mounting over a cooking surface in kitchen projects. The hood is built from alder, so it matches alder cabinetry and trim work in custom and semi-custom kitchens. This model is part of the Signature series, which gives it a straight, flat valance profile suited to clean-lined, transitional layouts. The 36 inch width aligns with standard 36 inch cooktops and ranges, allowing the hood to span the full appliance width. As a wood range hood, it fits within cabinet runs while presenting a furniture-style appearance instead of sheet metal. The product is categorized as a wood range hood for kitchen and bath cabinet applications, so it is intended for use in built-in cabinetry installations rather than freestanding setups.

Key Signature Range Hood Details For Projects

• The 36 inch Signature hood width lets installers match common 36 inch appliance openings, so the hood can center over standard ranges without altering base cabinet layouts.
• The flat valance design creates a straight lower edge, which simplifies aligning the hood with adjacent doors or trim across a run of wall cabinets.
• Alder construction matches alder cabinet programs, helping maintain a consistent wood species and grain pattern from the hood to surrounding face frames and doors.
• This hood uses the standard Signature hood chimneys, allowing the same chimney style to be carried across different Signature hood widths on a project.
• The hood is classified under kitchen and bath cabinet accessories, so it integrates directly into cabinet design work and aligns with cabinetry-focused installation workflows.

Wall Mount Hood Fit And Installation Approach

This 36 inch Omega National wood range hood is designed as a wall mount unit, so it positions directly against the wall above the cooking zone. The hood installs using Omega National's standard French cleat hanging system, which provides a matching cleat interface between the hood and the wall. That French cleat method allows the hood body to sit flush while the weight transfers through the cleat, helping installers set elevation and level before final fastening. The product is identified as a kitchen and bath cabinet accessory, which aligns with typical cabinet installation sequencing where the hood is set along with wall cabinets. Using the standard Signature hood chimneys on this model means chimney fit and attachment follow the same approach as other Signature series widths on the job.

Using This 36 Inch Signature Hood In Projects

Where This Omega National Wood Hood Fits Best

This Omega National 36 inch alder Signature hood fits kitchen projects calling for a wood range hood over a 36 inch cooking surface. The alder material supports use in kitchens where alder face frames, doors, or moldings are already specified. Because this unit is a wall mount range hood, it suits layouts with a cooking zone against a wall rather than on an island. The straight, flat valance works well in designs that favor clean lines, giving installers a simple lower visual line to coordinate with adjacent cabinet rails. The hood uses standard Signature hood chimneys, so it can be paired with those chimneys to reach the desired height from the hood body toward the ceiling line. With its classification as a wood range hood in the kitchen and bath cabinet accessories category, it is well suited to residential kitchen cabinet packages and similar built-in environments.

Details That Support Repeatable Liner And Vent Setup

This Signature hood ships with a silver metallic liner that accommodates all Broan and Sirius ventilation, so installers can match the liner opening with Broan or Sirius ventilators by model choice. Having a liner that is specified to work with all Broan and Sirius ventilation lets the hood interior be set up consistently across different Broan or Sirius units, which simplifies layout work for the cutout and ducting connection. The liner's silver metallic construction provides a finished interior surface for the hood cavity surrounding the ventilation equipment. The hood uses Omega National's standard French cleat hanging system, and that repeated hanging method supports consistent placement of the hood across multiple installations in the same project line. All installation hardware is listed as part of this system, and that statement indicates the mounting approach is planned around the provided French cleat layout. Ventilators are not part of the hood, so the ventilation unit is selected separately to pair a specific Broan or Sirius ventilator with the liner. Chimneys are also identified as sold separately, allowing chimney height and style within the Signature chimney family to be chosen according to ceiling height and design. This combination of a liner that accommodates all Broan and Sirius ventilation, a standard French cleat hanging system, and the use of standard Signature hood chimneys creates a repeatable framework for installing the same hood style in several kitchens with different ceiling conditions and ventilator selections.

Common Questions About This Omega National Hood

Selecting This Hood For Your Next Kitchen Run

The Omega National 36 inch alder Signature straight wall mount range hood R2136SMB1QUF1 offers a wood hood solution centered on a 36 inch opening, alder construction, and a flat valance profile. With a silver metallic liner that accommodates all Broan and Sirius ventilation, a standard French cleat hanging system, and compatibility with standard Signature hood chimneys, this model fits workflows focused on coordinated cabinetry and predictable installation steps. Use this hood when a 36 inch wall mounted wood range hood in alder is required to match cabinet design and ventilation choices around Broan or Sirius units.