Amerock self-close variable overlay hinge describes a semi-concealed face mount hinge that automatically pulls the door shut at the end of travel, which helps doors seat consistently against the frame on every use. The variable overlay design means the hinge can serve different overlay conditions on face-frame cabinets, giving flexibility when aligning existing doors or setting up new work. This hinge belongs to the Amerock Corporation semi-concealed hinge class, so part of the hardware remains visible while the working components stay largely out of sight, which keeps the cabinet face uncluttered while still using a traditional look. The hinge is identified by the manufacturer part number BPR7629ORB, which ties it directly to Amerock documentation and lets shops reorder the same component when matching previous installations. As a face mount hinge, it fastens directly to the cabinet frame face, which suits standard face-frame construction commonly used in kitchen and utility cabinets.
This Amerock semi-concealed hinge is designed as a face mount unit, meaning it attaches directly to the cabinet face frame rather than to a concealed cup in the door, which matches common construction methods in face-frame cabinetry. The hinge is described as screw-on, so it is configured for screw fastening during installation, which lets installers secure the hinge to both door and frame using typical cabinet construction workflows. With a length of 2-3/4 inches, the hinge body spans a moderate section of the door edge, which gives a predictable reference when laying out multiple hinges across tall doors. The 3/4 inch projection describes how far the hinge extends from its mounting surface, which influences how the door sits in relation to the frame during swing. A width of 2 inches defines the transverse footprint, which matters when aligning the hinge on narrow frames or stile edges in a run of cabinets.
This hinge is categorized as a semi-concealed face-frame hinge and face mount hinge, which positions it for use on framed cabinets where the door overlays the face frame rather than sitting completely flush inside an opening. The variable overlay description means it can handle different overlay conditions on the same basic hinge pattern, which is useful when some doors cover more of the frame than others yet need similar hardware. Because it is part of the Amerock Corporation hinge line, it pairs well in projects that already use Amerock hardware, keeping component style and performance consistent across a room. The oil rubbed bronze finish makes the exposed portion of the hinge visually suitable where other oil rubbed bronze knobs, pulls, or catches are specified, helping the hardware read as a coordinated set on both new cabinets and refacing work.
The self-close feature on this Amerock self-close variable overlay hinge provides a built-in closing pull near the end of swing, which helps doors land in the same resting position after every use and reduces the need to push them fully shut. Variable overlay capability allows the installer to position doors to cover more or less of the frame while using this same hinge, which aids in fine-tuning reveals and aligning doors across multiple openings. The steel material gives the hinge a rigid structure, which supports the door along its 2-3/4 inch length and helps keep alignment stable under regular cabinet use. A 3/4 inch projection and 2 inch width define the hinge envelope, which helps installers position doors so they clear adjacent fronts and hardware while maintaining the intended overlay. The manufacturer part number BPR7629ORB identifies the exact hinge configuration, which matters when replacing existing hinges or matching additional doors to an established installation.
The Amerock self-close variable overlay hinge is a semi-concealed face mount hinge, so it suits face-frame cabinets where the hinge mounts to the frame front and the door overlays the frame.
The variable overlay feature lets this hinge work with different door overlay amounts on the same face-frame style, which helps align reveals and match existing cabinet conditions without changing hinge type.
The self-close function on this hinge pulls the cabinet door shut near the end of travel, which helps doors rest fully against the frame and reduces partially open door positions.
The BPR7629ORB hinge has a length of 2-3/4 inches, a projection of 3/4 inch, and a width of 2 inches, which define its coverage on the door edge and frame face.
This Amerock hinge is made from steel with an oil rubbed bronze finish, which provides a metal structure and a dark rubbed appearance on the visible hinge portions.
The Amerock part number BPR7629ORB uniquely identifies this self-close variable overlay face mount hinge, which supports accurate reorders and matching hinges across multiple cabinets.
The Amerock self-close variable overlay hinge, part number BPR7629ORB, ties together self-closing action, variable overlay capability, and face mount installation for framed cabinets, which keeps door alignment and closing feel consistent across a run. The steel construction, 2-3/4 inch length, 3/4 inch projection, and 2 inch width define a repeatable footprint that suits common cabinet door sizes. The oil rubbed bronze finish coordinates with similar cabinet hardware finishes, which keeps the visible portions of the hinge visually integrated with knobs and pulls. For work that specifies Amerock Corporation hardware and needs a semi-concealed variable overlay solution in oil rubbed bronze, this hinge provides a clearly defined option to match across cabinets.
Sold In: 1 Pair