Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
14mm x 300mm shelf support from Sugatsune America is a steel shelf support designed to carry a projecting shelf from a wall. The 300mm length provides a deep bearing surface for the shelf, which matters when supporting wider shelves used in closets, garages, or general storage. The 14mm diameter creates a compact support profile, so the hardware stays visually minimal while still engaging the wall and shelf with a solid steel member. The product is made from 303/304 stainless steel, which resists corrosion in normal indoor environments and helps the support maintain appearance over time. A satin stainless steel finish presents a low-gloss look, which helps the support blend with contemporary hardware and reduces glare under lighting. The manufacturer part number DSP-M/30 clearly identifies this specific size and finish for repeat orders or matching additional supports on the same installation.
The 14mm x 300mm shelf support is supplied with a screw and a plastic expansion anchor, creating a mechanical connection that relies on the anchor gripping into the wall substrate. The manufacturer notes that the support is not designed for drywall installation, so it is intended for use where the expansion anchor can bite into more solid material such as masonry or comparable substrates. This combination of a steel body and expansion anchoring means the installer prepares a suitable hole for the plastic anchor, drives the screw through the support, and tightens into the anchor to clamp the support against the wall. In practice, this helps the shelf support work as a cantilevered element bearing load back into a firm wall structure rather than into a hollow drywall panel.
The Sugatsune America shelf support DSP-M/30 is positioned within the Shelf, Closet & Garage Organization category, so it is intended for holding shelves that organize storage in these spaces. The 300mm length allows use with shelves that project substantially from the wall, which is common in closet and garage layouts that need deeper storage surfaces. Because it uses 303/304 stainless steel, the support suits indoor environments where metal hardware may experience humidity, such as near entryways or in utility and garage areas, while maintaining its structural performance. The satin stainless finish also coordinates with other satin stainless hardware, which matters in projects where visible supports need to match handles, closet rods, or other exposed fittings. By using a 14mm diameter profile, the support remains narrow in view, helping create a clean, simple look under glass or solid shelves while still presenting a steel core to carry load.
The defined 14mm diameter and 300mm length give installers fixed dimensions to work with when laying out multiple supports, which simplifies drilling patterns and spacing along a wall run. Knowing the exact projection allows the shelf designer to select shelf depths that fully utilize the 300mm support length without overhanging excessively. The combination of screw and plastic expansion anchor provides a repeatable mounting method: each support uses the same style of mechanical fastening into the wall substrate, which helps maintain alignment across several supports on one shelf. The note that the shelf support is not designed for drywall installation directs its use toward more solid substrates, helping the steel support transfer shelf loads into a material that can accept expansion anchors. With the product clearly identified by manufacturer part number DSP-M/30, installers and shops can specify this exact 14mm x 300mm satin stainless model whenever they need consistent geometry and appearance across a project.
The DSP-M/30 shelf support has a 14mm diameter and a 300mm length, giving a narrow steel body with substantial projection to support deeper shelving runs from a wall.
The shelf support uses 303/304 stainless steel with a satin stainless steel finish, providing corrosion resistance and a subdued appearance that coordinates with similar satin stainless fittings.
The DSP-M/30 shelf support is not designed for drywall installation, so it is intended for mounting into sturdier substrates where its plastic expansion anchor can grip effectively.
The stainless steel shelf support is supplied with a screw and a plastic expansion anchor, so the load transfers through the screw into the anchor set within the wall material.
This Sugatsune shelf support is categorized for Shelf, Closet & Garage Organization, so it is used to hold wall-mounted shelves in storage, closet, and garage applications.
The DSP-M/30 part number identifies this specific 14mm x 300mm satin stainless steel shelf support, helping shops and installers match size, material, and finish across multiple installations.
The 14mm x 300mm shelf support from Sugatsune America offers a defined combination of diameter, length, and stainless construction tailored to wall-mounted shelving. The 303/304 stainless steel body with satin stainless finish suits visible applications where appearance and corrosion resistance both matter. With its screw and plastic expansion anchor mounting and its note that it is not designed for drywall installation, this support is aimed at shelves bearing on more solid substrates in closets, garages, or similar storage areas. When a project calls for a 300mm projecting, stainless shelf support identified by part number DSP-M/30, this model provides consistent geometry and finish for repeatable layouts.
Sold In: 1 Each