Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
12mm x 120mm shelf support describes a Sugatsune America support with a 12mm diameter body and 120mm length, which provides a solid bearing surface for a shelf so load sits on metal instead of the wall finish. The material is 303/304 stainless steel, so the support resists corrosion in typical indoor shop, kitchen, or closet environments and maintains a consistent fit over time. The finish is satin stainless steel, which presents a low-glare appearance that blends into modern hardware while still matching other stainless components visually. The support is classified under shelf supports, so it is intended as the structural element that carries the shelf rather than decorative trim. The manufacturer part number DSP-S/12 identifies this exact size and configuration, which simplifies repeat ordering when matching existing installations or standardizing a project.
The DSP-S/12 designation identifies this unit as a steel shelf support, so it is intended to be anchored into a solid substrate for the shelf to bear directly on the 120mm long stainless projection. The web description notes that it is supplied with a screw and plastic expansion anchor, which indicates the mounting interface is based on a screw driven into an expansion anchor so the load transfers from the support through the screw into the surrounding base material. The same description states that it is not designed for drywall installation, which directs this support toward more solid materials where an expansion anchor and screw can grip effectively. The note Glass / Shelf not included indicates that the support is sold as the structural hardware only, so the installer or fabricator selects the shelf material and builds around the fixed 12mm diameter support dimension.
The 12mm x 120mm shelf support from Sugatsune America sits in the shelf, closet and garage organization category, so it fits projects where shelving needs a compact point support rather than full brackets. The 303/304 stainless steel construction means it can be used in interior spaces where metal hardware may be exposed to occasional moisture, such as near entryways or utility rooms, without the support itself being the weak point. The 120mm length allows the support to extend well under a typical shelf depth, so the shelf edge can remain visually light while still resting on metal along a meaningful portion of its width. The satin stainless finish keeps reflections subdued, which suits installations where the support may be visible through glass shelves or under open wood shelving in closets or display runs.
The defined 12mm diameter gives a clear drilling target, so fabricators can bore consistent holes in wall panels or support members knowing the stainless steel support will sit snugly, which reduces time spent correcting loose fits. The 303/304 stainless steel material keeps the bearing surface stable under normal interior conditions, so shelves that move slightly under load will continue to ride on a smooth metal surface rather than a corroded or rough edge. The presence of a screw and plastic expansion anchor in the product description indicates the support is oriented toward solid mounting situations where an expansion anchor can grip, helping the shelf support behave predictably once driven home. The explicit statement that it is not designed for drywall installation clarifies that the load path is intended for stronger substrates, which helps planners match this DSP-S/12 model to appropriately solid wall or panel conditions on drawings and in the shop.
The DSP-S/12 shelf support uses 303/304 stainless steel, giving the support corrosion-resistant metal so the bearing surface under the shelf stays stable in normal indoor environments.
The Sugatsune DSP-S/12 shelf support has a 12mm diameter and 120mm length, providing a defined drilling size and an extended projection to carry the shelf depth.
The stainless steel shelf support is described as supplied with a screw and plastic expansion anchor, so the load is carried through a screw anchored into a suitable solid base material.
The DSP-S/12 shelf support is stated as not designed for drywall installation, directing its use toward sturdier substrates that can support an expansion anchor and screw.
This support is categorized under shelf, closet and garage organization shelf supports, so it fits closet systems, storage shelving, and similar interior projects requiring point supports.
The DSP-S/12 part number identifies this exact 12mm by 120mm stainless steel shelf support from Sugatsune America, helping drawings and orders reference the same hardware.
The 12mm x 120mm shelf support from Sugatsune America combines a defined 12mm diameter with 303/304 satin stainless steel to support shelves in interior organization projects. The DSP-S/12 part number ties your layouts, cut lists, and ordering back to a specific, repeatable stainless support size. The 120mm length extends the support under the shelf depth, while the screw and plastic expansion anchor mounting method focuses the product on solid substrates rather than drywall. For projects running through Wurth Baer Supply, specifying this stainless steel shelf support gives a clear, consistent hardware choice for glass or other shelf materials that need a clean metal bearing point.