Cable Double-Sided Grommets - Sugatsune America LS60WT

Double-Sided Adjustable Grommet For Clean Cable Runs

Double-sided adjustable grommet from Sugatsune America provides a finished cable pass-through on both sides of a panel or door, so cable holes look intentional and professional instead of rough cut. This grommet is designed for panels or doors from 3/4 inch to 1 inch thick, which suits many standard interior partitions and cabinet doors in commercial and residential projects. The removable cover increases the grommet opening when larger bundles or different cable types are needed, allowing one part to handle changing layouts. The white finish supports use in restrooms, storage rooms, closets, and laundry rooms, where light surfaces are common and a neutral look is preferred. As part of Sugatsune America's LS series under part number LS60WT, this double-sided design keeps both faces of the opening consistent, which helps maintain a clean look wherever the panel is visible from both sides.

Key Grommet Details That Support Daily Use

• The double-sided adjustable grommet design finishes both faces of the opening, so panels and doors look clean from each side in pass-through areas that see traffic.
• Suitability for panels or doors from 3/4 inch to 1 inch thick aligns with common material sizes, which simplifies selection on standard partitions, doors, and cabinet constructions.
• The removable cover that increases the grommet opening lets installers adapt the same opening for different cable bundles, reducing rework when equipment or routing changes.
• Use in restrooms, storage rooms, closets, and laundry rooms points to typical light-duty service locations, guiding where this LS60WT grommet fits naturally into building layouts.
• Sugatsune America branding and the LS60WT identifier help match this specific cable double-sided grommet across drawings, parts lists, and future maintenance needs.

Installation Fit On Panels And Doors

Designing this double-sided adjustable grommet for panels and doors from 3/4 inch to 1 inch thick focuses it on widely used construction thicknesses, so the body can seat correctly without odd shimming. The double-sided configuration means each side of the opening is finished, which is useful where both faces of a door or partition are visible and need a consistent appearance. The removable cover that can be taken off to increase the grommet opening helps an installer route larger cable bundles through the same hole, instead of modifying the panel. Because this white LS60WT cable grommet is noted as useful in restrooms, storage rooms, closets, and laundry rooms, it aligns with typical interior wall and door constructions found in those spaces.

Using This LS60WT Grommet In Real Projects

Where This Double-Sided Adjustable Grommet Fits Best

This cable double-sided grommet from Sugatsune America is described as useful for restrooms, storage rooms, closets, and laundry rooms, so it suits locations where cables pass through light-colored partitions or cabinets to reach fixtures or equipment. The suitability for panels and doors from 3/4 inch to 1 inch thick means it works on many interior doors, utility room partitions, and closet panels that follow standard sheet and door thicknesses. Having a finished ring on both sides of the cutout helps in situations where people see both faces of the partition, such as restroom divider panels or laundry room doors with visible cable routes. The white double-sided grommet appearance supports these spaces by blending with painted or laminate light surfaces often specified for them.

Details That Help Repeatable Cutouts And Routing

The LS60WT cable grommet is identified as a double-sided adjustable grommet, signaling that both faces of the opening are controlled while the internal opening size can be changed by removing the cover, which helps standardize cutout locations across multiple panels. Designing the grommet for 3/4 inch to 1 inch thick panels or doors narrows the range to common stock thicknesses, so shop drawings and field work can follow a predictable material callout without unusual variations. The removable cover that increases the grommet opening allows one panel opening to support smaller or larger cable bundles over time, reducing the need to alter the door or panel when equipment changes. Because the product is described as useful in restrooms, storage rooms, closets, and laundry rooms, it clearly targets utility and service spaces where neat cable routing through partitions improves access while maintaining a finished look.

Common LS60WT Cable Grommet Questions

Select This LS60WT Grommet For Clean Panel Openings

The LS double-sided grommet 2-3/8 inch diameter in white, part number LS60WT from Sugatsune America, pairs a finished look with flexibility for cable routing in real projects. Its design for panels and doors from 3/4 inch to 1 inch thick targets common construction materials, which streamlines planning across restrooms, storage rooms, closets, and laundry rooms. The removable cover that increases the grommet opening supports future cable changes without altering the original cutout. For projects needing neat, consistent cable pass-throughs on both sides of a partition or door, this cable double-sided grommet from Sugatsune America offers a defined, repeatable solution.