Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
LS76WT double sided grommet manages cable or conduit openings through panels or doors while keeping the cutout edge covered on both sides. This double-sided adjustable grommet works on a single through-hole, so the penetration looks finished from each face of the panel.
This Sugatsune America grommet is designed for panels or doors from 1 inch to 1-9/16 inches thick, so it suits many interior partitions and doors where cables or small pipes need to pass through. That thickness range lets one part serve across common door and partition builds.
The cover on this LS76WT grommet can be removed to increase the grommet opening, so one opening can handle tighter runs when the cover is in place or larger bundles when the cover is taken off. The white finish supports visually low-profile cable runs in light-colored interiors.
This double-sided adjustable grommet is specified for panels or doors from 1 inch to 1-9/16 inches thick, so installers can plan around that range when locating it in frames, partitions, or door cores. That thickness window supports common interior assemblies without resorting to special fabrication.
The LS76WT grommet uses a circular opening around 3 inches in diameter, so the cutout layout centers around a single round hole through the door or panel. Once set, the removable cover gives the option of tightening the visible opening or widening it later to accept added cables.
This Sugatsune America LS76WT double-sided adjustable grommet is described as useful for restrooms, storage rooms, closets, and laundry rooms, so it targets utility spaces where services often need to pass through partitions or doors. In these locations, exposed holes for cabling or small pipes can look unfinished, especially when both sides of the door or partition are visible.
By fitting this 3 inch diameter white grommet into the opening, the cut edge of the panel or door is covered on both sides, so the penetration looks intentional rather than improvised. That helps maintain a consistent appearance in service corridors, back-of-house areas, or residential utility rooms while still allowing necessary services to pass through.
The suitability for panels and doors from 1 inch to 1-9/16 inches thick means the same LS76WT model can be used across solid doors, thicker closet partitions, or utility room walls built within that thickness band. This allows installers to hold one grommet type in stock while addressing multiple locations that share similar cable-routing requirements.
The LS76WT double sided grommet is described as adjustable because its cover can be removed to increase the grommet opening. With the cover in place, the cable path is more closed in, which helps visually tighten the penetration where only a few cables or a single line need to pass.
When additional services are routed later, the same grommet can have its cover removed to create a larger opening, so more cables or a slightly larger element can pass through without changing the original 3 inch diameter cutout. That ability lets one installed grommet handle both initial and expanded service runs while keeping the hole edge concealed on both faces.
The fact that this is a double-sided part means that even when the cover is removed, the penetration edge around the 3 inch diameter cutout remains finished on both sides, supporting repeat work or re-routing when layouts evolve. For installers, that combination of fixed hole size and adjustable opening reduces rework on the panel or door itself when cabling needs grow.
The LS76WT double sided grommet fits panels or doors from 1 inch to 1-9/16 inches thick, so it covers many interior doors and partitions within that thickness range.
The LS76WT grommet uses a removable cover to change the opening size, so it can handle smaller cable bundles initially and larger runs later through the same 3 inch cutout.
The LS76WT double sided design covers the hole edge on both faces of a door, which keeps service penetrations looking finished wherever both sides are visible.
The Sugatsune LS76WT grommet is described as useful for restrooms, storage rooms, closets, and laundry rooms, where services often pass through panels or doors.
The LS76WT grommet is white and designed as a double sided trim for a 3 inch diameter opening, which visually finishes light-colored utility and storage spaces.
The LS76WT removable cover lets the opening enlarge without altering the 3 inch hole, so additional cables can be routed later while the edges remain concealed.
The Sugatsune America LS76WT double sided adjustable grommet combines a 3 inch diameter form with a 1 inch to 1-9/16 inches panel or door thickness range, so one part can handle many interior penetrations. Its removable cover supports both tight and expanded service runs through the same opening.
For restrooms, storage rooms, closets, and laundry rooms where exposed cutouts can detract from otherwise clean finishes, this white grommet turns a functional cable or conduit pass-through into a controlled, finished detail that still allows future changes.