Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Cable Grommets Double-Sided describes this Sugatsune America LS76BL part, which creates a finished opening through panels or doors while managing cables. This double-sided adjustable grommet surrounds the cutout from both sides, so the edge is covered and the opening looks uniform on each face of the panel.
The LS76BL is designed as a grommet for panels or doors from 1 inch to 1-9/16 inches thick, so it suits common construction where a standard single-side grommet would not cover the full depth. That thickness range lets you use the same part across multiple room types with similar door and panel builds.
The cover on this double-sided adjustable grommet can be removed to increase the grommet opening, so you can start with a more concealed opening, then open it further when more cables or larger connectors have to pass through the same hole.
This LS76BL grommet is described as useful for restrooms, storage rooms, closets, laundry rooms, and similar spaces, which aligns it with light commercial and residential utility areas where cables, tubing, or lines must penetrate doors or partition panels cleanly.
The LS76BL double-sided adjustable grommet is specified for panels or doors from 1 inch to 1-9/16 inches thick, so it engages the full depth of typical interior doors rather than only the surface. That depth engagement helps stabilize the trim around the opening.
Because the design is double-sided, the grommet presents a finished edge on both faces of the panel or door. This is useful where both sides of the door or partition are exposed, such as entries to restrooms or closets, since each side sees similar appearance.
The removable cover that can increase the grommet opening gives flexibility when routing cables through thicker doors. You can work with the original opening for slender leads, then remove the cover to handle connectors that would otherwise bind at the edge.
The LS76BL is described as useful for restrooms, storage rooms, closets, laundry rooms, and similar spaces, so it is suited to interior areas where services cross through doors or partitions. In these locations, a raw hole in the door or panel would expose substrate edges to view.
Because this part is a double-sided adjustable grommet, it surrounds the opening on both sides of the door or panel. That two-sided coverage matters wherever occupants see both faces, such as a closet door between hallway and storage, keeping the cable pass-through visually consistent.
The stated fit for panels or doors from 1 inch to 1-9/16 inches thick matches many solid core and thicker hollow-core interior doors found in restrooms and utility areas. Using a grommet designed for this range keeps the trim engaged along the full thickness instead of floating on one surface.
The black finish called out in the SAP description LS DOUBLE SIDED GROMMET 3' DIA BLACK provides contrast against light-colored doors or blends with darker finishes, which helps the pass-through either stand out for identification or recede, depending on the surrounding material.
The LS76BL double-sided adjustable grommet design means the two faces work together around the door or panel thickness. That configuration helps seat the grommet uniformly, so the cutout alignment remains consistent from one opening to the next on a project.
The defined panel or door thickness range of 1 inch to 1-9/16 inches gives a known working envelope. When panels or doors fall inside this range, the installer can rely on the grommet engaging properly along the depth, which reduces variability between different openings.
The removable cover that increases the grommet opening lets you adapt the same penetration as cabling requirements change. Instead of relocating the hole when cable bundles grow, the cover can be removed to gain more clearance while keeping the surrounding edge finished.
Because the product is identified as Cable Grommets Double-Sided from Sugatsune America with part number LS76BL, facility managers can reference that specific identifier when additional restrooms, storage rooms, closets, or laundry rooms need identical cable pass-through details, helping keep future work visually and dimensionally consistent.
The LS76BL double-sided adjustable grommet is specified for panels or doors from 1 inch to 1-9/16 inches thick, so it suits many interior doors and partitions in utility areas.
The double-sided adjustable grommet design covers both faces of the opening, giving a finished edge on each side of the panel or door and helping stabilize the trim around the cutout.
The LS76BL has a cover that can be removed to increase the grommet opening, so the same location can handle additional or larger cables when layouts or equipment change.
The Sugatsune America LS76BL double-sided adjustable grommet is described as useful for restrooms, storage rooms, closets, laundry rooms, and similar spaces needing clean cable pass-throughs.
The SAP description LS DOUBLE SIDED GROMMET 3' DIA BLACK indicates a black finish, which provides a neutral, dark edge around the opening to coordinate with many interior door colors.
The LS76BL manufacturer part number for this Cable Grommets Double-Sided product lets installers and facility staff reorder the same grommet to match existing openings across multiple rooms.
The Sugatsune America LS76BL double-sided adjustable grommet gives a defined solution for routing cables through panels or doors from 1 inch to 1-9/16 inches thick. The double-sided configuration and removable cover support both present and future cable runs through the same opening.
Its described use in restrooms, storage rooms, closets, and laundry rooms aligns with typical utility openings where a raw hole would look unfinished. Selecting this LS76BL Cable Grommets Double-Sided part standardizes those pass-throughs, so new and existing doors maintain a consistent finished edge as cable needs evolve.