
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
LSU60BL double-sided grommet is a double-sided adjustable grommet from Sugatsune America that manages wires and openings through panels or doors, giving a finished edge where cables pass between spaces in everyday commercial or residential projects. The grommet is designed for panels or doors from 3/4 inch to 1 inch thick, so it fits common door and panel constructions used in restrooms, storage rooms, closets, and laundry rooms. This panel thickness range lets installers use one part across multiple room types where similar cores are specified. The cover can be removed to increase the grommet opening, so the same grommet handles both smaller low-count cable bundles and larger openings when more clearance is needed. That removable-cover design helps avoid re-cutting or replacing the panel when conditions change after installation.
The LSU60BL double-sided adjustable grommet is made for panels or doors from 3/4 inch to 1 inch thick, so hole cuts in that material range seat the body correctly without improvised shimming. This defined thickness window supports predictable clamping across typical interior door and panel builds in restrooms, storage rooms, closets, and laundry rooms. The 2-3/8 inch diameter noted in the SAP description guides the installer to size the opening to match the grommet body, helping the part sit snugly in the cutout. With the cover removable to increase the opening, installers can first route the body into the hole, then decide whether to leave the cover in place or remove it to suit cable volume and connector size at that location.
The LSU60BL double-sided adjustable grommet is described as useful for restrooms, storage rooms, closets, laundry rooms, and similar spaces, so it supports projects where cables, hoses, or other lines need a neat pass-through between service areas and occupied rooms. Being double-sided means each side of the panel or door shows a finished grommet face, which helps maintain a consistent look inside and outside a storage closet or on both sides of a laundry-room partition. When fitted into panels or doors from 3/4 inch to 1 inch thick, the part aligns with materials commonly used for those room types, from utility-room doors to closet dividers. That alignment between intended room types and thickness range makes the LSU60BL suitable where multiple trades route lines through similar constructions on a project.
The LSU60BL double-sided adjustable grommet design is centered on a cover that can be removed to increase the grommet opening, which lets one product adapt to changing cable requirements at the same opening. On an initial install, an installer can use the cover to keep the opening smaller around a modest cable bundle, creating a contained pass-through that still protects the cut edge of a 2-3/8 inch diameter hole. If additional lines need to be pulled later, the cover can be taken off to open up the passage, so the original hole and grommet remain in use instead of being replaced. That adjustability supports straightforward re-work: cables, hoses, or similar runs can be increased in diameter while the grommet still shields the edges of panels or doors in the 3/4 inch to 1 inch range. In everyday service spaces such as restrooms, storage rooms, closets, and laundry rooms, this ability to adapt the opening helps projects absorb layout changes with less disruption to finished surfaces.
The LSU60BL double-sided adjustable grommet is designed for panels or doors from 3/4 inch to 1 inch thick, so it suits many typical interior panel and door constructions.
The LSU60BL grommet is described as useful for restrooms, storage rooms, closets, laundry rooms, and similar spaces where cables or lines pass through panels or doors.
The LSU60BL double-sided adjustable grommet has a cover that can be removed to increase the grommet opening, so the same opening can handle varying cable quantities or sizes.
The LSU DOUBLE SIDED GROMMET 2-3/8 DIA BLK description indicates a 2-3/8 inch diameter, which guides the installer in sizing the hole to match the grommet body.
The LSU DOUBLE SIDED GROMMET 2-3/8 DIA BLK description specifies a black grommet, giving a dark, neutral look that suits many restroom, storage, closet, and laundry installations.
The LSU60BL grommet is a Cable Grommets Double-Sided product from Sugatsune America, so its identity and part number are tied to that manufacturer.
The LSU60BL double-sided adjustable grommet from Sugatsune America brings a defined solution for routing lines through panels or doors from 3/4 inch to 1 inch thick in restrooms, storage rooms, closets, and laundry rooms. Its 2-3/8 inch diameter scale and removable cover give flexibility for both initial cable layouts and later changes, while the double-sided design keeps both faces of the opening finished. For projects that need clean, adaptable pass-throughs at consistent panel thicknesses, this LSU DOUBLE SIDED GROMMET 2-3/8 DIA BLK provides a focused option that aligns with typical service-room conditions.