Sugatsune America Swivel Caster With 3-15/16" Polyamide / Polyurethane Wheel With Brake, Threaded Stem Mount 220lb Capacity - EX-100N16S

Sugatsune Swivel Caster With Brake For Controlled Moves

Sugatsune swivel caster with brake pairs a 3-15/16 inch polyamide and polyurethane wheel with a threaded stem mount, so cabinets or carts gain smooth rolling support with a defined mounting interface. The caster uses ball bearings in both the swivel and the wheel, which reduces rolling resistance and helps heavy loads start and stop predictably. A 220 lb load capacity matches many small equipment bases and mobile cabinets, providing a clear limit when planning weight distribution. The type is swivel, so the wheel can rotate around a vertical axis and steer easily in tight spaces. A dual brake design locks both the wheel and the swivel, which keeps the unit from rolling or pivoting when parked. A large brake lever and indicator support quick visual confirmation of the locked state during regular use.

Key Swivel Caster Details That Support Daily Work

• The 3-15/16 inch wheel diameter helps the caster roll over minor floor seams, which supports smoother cabinet movement in typical shop or jobsite conditions.
• The polyamide and polyurethane wheel material balances smooth rolling with traction, which aids control when starting, stopping, and positioning equipment.
• Ball bearings in both swivel and wheel reduce friction during movement, which helps keep maneuvering effort low even as the load approaches the rated capacity.
• The threaded stem mounting type gives a defined connection point, which supports repeatable alignment when installing into compatible threaded receivers.
• Locking both wheel and swivel helps hold the cabinet or fixture in place, which matters when working on precise tasks that should not shift.
• The large brake lever with indicator simplifies setting and checking the brake position, which supports consistent locking habits during daily routines.

Threaded Stem Mounting And Brake Operation In Use

The threaded stem mount establishes a single central connection point between the caster and the cabinet or frame, so the installer can position the caster where structure and layout allow. Because the stem is threaded, the connection is designed to be mechanically engaged rather than relying on a friction fit, which supports stable mounting once tightened. The large brake lever extends beyond the wheel, so it remains accessible even when the caster is positioned slightly inward from the edge of the upper cabinet. Locking both the swivel and wheel limits movement in all directions, which helps the cabinet stay oriented as set while work is performed. The rear bumper protects against impacts at the back of the caster, helping the cabinet structure or contacting surfaces avoid direct hits during rolling or parking.

How This Dual Brake Caster Supports Cabinet Mobility

Where This Stem Mounted Caster Fits Best

This caster belongs to the stem mounted casters category and uses a threaded stem mounting type, so it suits applications built around threaded stem receivers. The 220 lb load capacity directs it toward cabinets, carts, or fixtures sized within that range, keeping the caster working within its stated limit. Because the caster is a swivel type, it helps furniture or equipment that must navigate turns or tight corridors rather than staying on a fixed track. The wheel diameter of 3-15/16 inches fits layouts that need a moderate ride height, balancing ground clearance with overall cabinet height. The rear bumper offers impact protection at the back of the caster, which suits cabinets that may contact walls or other fixtures during repositioning.

Details That Support Repeatable Positioning And Control

The dual brake system locks both the swivel and the wheel, so once set, the cabinet resists rolling and rotating, supporting repeatable positioning for tasks that benefit from a stable base. The large brake lever and indicator provide an obvious control point and status reference, which helps users operate the brake consistently without searching for a small tab. Ball bearings in both swivel and wheel support maximum smooth movement, reducing drag as the cabinet is turned or pushed into place. The combination of polyamide and polyurethane in the wheel material assists in maintaining smooth travel with controlled grip, which can aid accurate final positioning. The threaded stem connection provides a clear mechanical interface, which supports consistent caster alignment across multiple mounting points in the same project.

Common Questions About The EX-100N16S Swivel Caster

Choose This Swivel Caster For Controlled Cabinet Mobility

The EX-100N16S from Sugatsune America combines a 3-15/16 inch polyamide and polyurethane wheel, ball bearings, and a dual brake to support controlled movement and firm locking of cabinets and fixtures. Its threaded stem mount aligns with threaded receivers, giving a defined interface for mounting. A 220 lb load capacity per caster guides planning for cabinet or cart weight. The large brake lever with indicator and rear bumper provide straightforward control and impact protection. For builds that call for a swivel caster with both wheel and swivel locking, this model offers a clearly defined set of performance details to match against project requirements.