
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune swivel caster gives a 3-15/16 inch polyamide/polyurethane wheel on a swivel design so cabinets or carts roll smoothly while still turning easily in tight shop or jobsite spaces. The caster is plate mount, so it fastens flat to the cabinet bottom, which helps spread the load and support heavier assemblies within the 220 lb capacity. Ball bearings in both the swivel and wheel provide maximum smooth movement, so equipment can be repositioned with less effort during layout changes or service work. The wheel material combines polyamide and polyurethane, so rolling is firm yet cushioned, which helps when moving across typical workshop surfaces. The caster is a swivel type, so it handles direction changes without lifting the unit, which matters when units are loaded close to the rated capacity.
The EX-100PS plate mount design sets the caster on a flat mounting plate, so installers can align it square to cabinet edges for predictable tracking and positioning. With a 220 lb load capacity, the caster supports substantial cabinet or cart weights, so layout planning can account for total loading across multiple casters. The 3-15/16 inch wheel diameter lifts the cabinet enough to roll over typical shop debris more easily, which matters when routing mobile bases through busy work areas. Ball bearing construction in both swivel and wheel supports smoother rotation under load, which helps during final positioning along walls or workstations. The protruding brake lever allows placement slightly inward from the cabinet edge while still keeping the control accessible in tight installations.
This Sugatsune America swivel caster belongs to the builders hardware and plate mounted casters category, so it suits mobile cabinets, carts, and similar shop fixtures that need frequent repositioning. The polyamide/polyurethane wheel material pairs well with many hard workshop floors, so cabinets can roll while maintaining firm contact. With a 3-15/16 inch wheel, the caster supports movement where a moderate ride height is useful without raising cabinets excessively. The rear bumper is built to protect from impacts, so occasional bumps against walls, benches, or adjacent units are cushioned at the caster rather than directly at the cabinet base. On the no-brake type, the front rubber bumper protects feet, so that variant suits installations where operators stand close to moving carts.
The EX-100PS plate mount caster is described as a dual brake caster plate with brake, and its web description states that it locks both wheel and swivel, so once set, the cabinet resists rolling and pivoting, which is useful for work requiring a stable platform. Ball bearings equipped in both swivel and wheel provide maximum smooth movement, so even near the 220 lb capacity, turning and rolling stay manageable during daily use. The brake lever protrudes beyond the wheel, so even when the caster is mounted slightly inward from the edge of the upper cabinet, the operator can reach and operate the control without shifting the unit. A large brake lever and indicator support easy operation, so confirming locked or unlocked status becomes quicker when several casters support the same structure, reducing time spent checking each point. These combined details support repeatable positioning and locking across multiple cabinets, carts, or shop fixtures built around the same caster specification.
The EX-100PS caster uses a plate mount design, so it fastens flat to the underside of cabinets or carts, spreading load across the mounting area for stable support.
This Sugatsune swivel caster has a 220 lb load capacity, so it supports substantial cabinet or cart assemblies when used within that rating across the installed casters.
The EX-100PS uses a 3-15/16 inch polyamide/polyurethane wheel, giving a firm yet cushioned rolling surface suitable for many shop and cabinet applications.
This caster locks both wheel and swivel, so engaging the brake stops rolling and turning together, helping keep cabinets or carts fixed during work.
The brake lever protrudes beyond the wheel so it remains accessible even when the caster is mounted slightly inward from the cabinet edge, aiding operation in tight layouts.
This caster has a rear bumper that protects from impacts, and the no-brake type adds a front rubber bumper to protect feet in areas with regular foot traffic.
The EX-100PS plate mount caster from Sugatsune America combines a 3-15/16 inch polyamide/polyurethane swivel wheel with a 220 lb capacity, so it suits cabinets or carts that need both smooth movement and firm locking. Dual braking on both wheel and swivel, supported by ball bearings, gives stable positioning after units are rolled into place. The protruding large brake lever with indicator, plus impact protection from the rear bumper and rubber bumper on the no-brake type, supports straightforward operation in active shop environments. For cabinet, cart, or fixture builds that match these characteristics, this caster gives a defined, repeatable hardware choice.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SLEX-100N12S Mfr# EX-100N12S | Sugatsune America Swivel Caster With 3-15/16" Polyamide / Polyurethane Wheel With Brake, Threaded Stem Mount 220lb Capacity - EX-100N12S | ||||
Sold in: 1 Each | SLEX-100N12 Mfr# EX-100N12 | Sugatsune America Swivel Caster With 3-15/16" Polyamide / Polyurethane Wheel No Brake, Threaded Stem Mount 220lb Capacity - EX-100N12 | ||||
Sold in: 1 Each | SLEX-100N16S Mfr# EX-100N16S | Sugatsune America Swivel Caster With 3-15/16" Polyamide / Polyurethane Wheel With Brake, Threaded Stem Mount 220lb Capacity - EX-100N16S | ||||
Sold in: 1 Each | SLEX-100N16 Mfr# EX-100N16 | Sugatsune America Swivel Caster With 3-15/16" Polyamide / Polyurethane Wheel No Brake, Threaded Stem Mount 220lb Capacity - EX-100N16 |