Sugatsune America Swivel Caster With 3-15/16" Polyamide / Polyurethane Wheel With Brake, Plate Mount 220lb Capacity - EX-100P

Sugatsune Swivel Caster EX-100P For Mobile Cabinets

Sugatsune swivel caster EX-100P is a plate-mounted swivel caster designed for applications needing controlled movement and dependable brake function on woodworking or cabinet projects. The caster uses a 3-15/16 inch polyamide and polyurethane wheel, so the rolling surface balances strength with smooth travel when moving loaded cabinets or shop fixtures. A 220 lb load capacity allows this caster to support substantial weight on each mounting point, giving designers predictable limits when laying out multi-caster bases. The brake mechanism locks both wheel and swivel, which stabilizes the cabinet by stopping not only rolling but also rotation under load. Ball bearings in both the swivel and the wheel provide maximum smooth movement, which reduces effort when repositioning fixtures along finished floors. This caster is identified as type swivel, so it is intended for installations where directional changes and maneuverability are part of normal use.

Practical Features That Support Daily Rolling Use

• The EX-100P locks both the wheel and the swivel, so cabinets stay fixed in both direction and position when the brake is applied, which helps during machining or assembly operations that require a steady base.
• Ball bearings in the swivel and wheel provide maximum smooth movement, so heavy cabinets or carts roll with less resistance, which matters when positioning units in tight shop layouts or along longer runs.
• The 3-15/16 inch polyamide and polyurethane wheel provides a durable rolling surface, helping the caster track consistently while supporting the 220 lb capacity during repeated moves on typical shop or showroom floors.
• The rear bumper protects from impacts during movement, so light bumps against walls or casework edges transfer through a protective surface rather than the housing, which can reduce damage to surrounding finishes.
• The brake lever protrudes beyond the wheel, so operation is unaffected even when the caster is mounted slightly inward from the cabinet edge, which helps when toe kicks or base geometry limit lever access.
• The large brake lever and indicator support easy operation, so installers and users can engage or release the brake with clear feedback, which aids in quickly confirming the caster position at a glance.

Mounting And Brake Operation For Shop Workflow

This Sugatsune America caster is a plate mount design, so it is intended to fasten to a flat underside surface on cabinets, carts, or fixtures where a mounting plate footprint fits the layout. The mounting type is listed as stem in the product data, which identifies the connection style as part of the caster specification. The caster is described as dual brake in the SAP description and locks both wheel and swivel in the web description, so braking action controls both rolling and pivoting motion at the same time. The brake lever protrudes past the wheel, allowing access even when the caster is positioned somewhat inward from the cabinet perimeter. A large brake lever and indicator are provided for easy operation, which supports quick, repeatable engagement and release during frequent moves in a busy work area.

Using This Plate Mounted Caster In Real Projects

Where This Swivel Caster Works Best

This product is listed under builders hardware and plate mounted casters, so it fits applications where cabinets, carts, or other shop fixtures need directional control and parking stability. The 220 lb capacity allows installers to calculate support by multiplying per-caster rating across the number of casters in a base, which helps align design loads to published limits. A 3-15/16 inch wheel diameter gives a moderate ride height, which can be factored into cabinet toe-kick or bench height during layout. The wheel material is specified as polyamide and polyurethane, so the rolling interface combines a structural core with a tread material suited to repeated indoor movement on hard surfaces. The rear bumper helps protect against impacts, so when cabinets are repositioned near walls or casework, the contact point is a designated bumper surface. The brake lever projection supports use on bases where the caster sits behind a slight overhang.

Why These Details Matter For Smooth Movement

Ball bearings in both the swivel and the wheel provide maximum smooth movement, so the caster tracks cleanly when the cabinet is pushed from different angles, which helps reduce effort over many repositioning cycles. Locking both wheel and swivel means the caster does not pivot or roll once braked, which is useful when using mounted equipment, aligning cabinet faces, or keeping aisles clear. The large brake lever and indicator aid quick identification of brake status, supporting efficient changeover between mobile and parked positions. Stem and plate mount details define how the caster integrates into the cabinet base, so builders can coordinate mounting patterns with substrate thickness and reinforcement. The rear bumper and, in other versions, front rubber bumper references in the data show that impact protection is part of the design language, which supports use near finished millwork and other sensitive surfaces.

Common Questions About The EX-100P Swivel Caster

Selecting This Caster For Cabinet And Cart Bases

The Sugatsune America swivel caster with 3-15/16 inch polyamide and polyurethane wheel and 220 lb capacity offers a defined set of traits for mobile bases. Plate mount construction and type swivel classification provide a clear mounting and maneuvering profile for cabinet and cart projects. The combination of dual brake function, ball bearing movement, rear bumper, and protruding brake lever gives installers concrete details for planning layout around brake access and impact points. For builders sourcing from Wurth Baer Supply, the EX-100P part number and dual brake caster description support straightforward specification when matching casters across multiple units in a project.