Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
door stopper with clear bumper from Sugatsune America is a floor mount passage door hardware component that controls how far a door swings, helping protect adjacent walls and finishes on impact. The 1-3/4 inch diameter head spreads contact over a wider surface, which helps reduce point pressure on the door edge. The clear acrylic bumper cushions the door at the stop point, which helps soften each impact in everyday opening and closing cycles. The satin finish on the body supports a clean, neutral look that works across many door styles. As a floor mount unit classified as passage door hardware, this HT-32P door stopper serves as a fixed reference point on the floor, so once positioned it provides a consistent stop location for repeatable door operation.
This floor mount door stopper uses a stainless steel screw 8 x 50 as its primary fastener, which anchors the HT-32P body securely into the floor substrate. That stainless steel screw size provides both length and corrosion resistance, which supports a firm hold in typical interior floor materials. The anchor plug used with the screw helps create a solid interface in drilled holes, which matters when mounting into masonry or other brittle materials. A special wrench is used with this assembly, which allows the fastener system and body to be tightened together in a controlled way. As a result, the installed door stopper functions as a stable contact point that keeps the passage door from over-traveling its intended swing arc.
The HT-32P floor mount door stopper from Sugatsune America fits into the passage door hardware category, so it is suited to situations where limiting door travel protects nearby walls or built-in elements. Because it mounts on the floor rather than the wall or baseboard, the stop location can align directly with the door swing path, which is useful when wall conditions or trim do not suit a wall stop. The 1-3/4 inch diameter contact face positions the clear acrylic bumper where the door meets the stop, so the actual contact point can match the designed swing radius of the door leaf. With its satin finished body, the installed stop visually blends with many latch and hinge finishes in door assemblies supplied through Wurth Baer Supply.
The clear acrylic bumper on this door stopper provides a defined cushioning interface at the impact point, which helps reduce the sharpness of contact as the door reaches full swing. That cushioned interface supports smoother operation in high-use openings, because every close and open cycle ends against the same material instead of direct metal-to-wood contact. The stainless steel screw 8 x 50 specified for this product offers corrosion resistance and strength, which contributes to long-term holding power when the door repeatedly loads the stop. The anchor plug that works with this screw creates better engagement in drilled holes, which helps the stop resist loosening in hard floor substrates. Using the special wrench with this assembly allows the installer to seat the body firmly onto the floor, which helps keep the height and alignment of the stop consistent relative to the door edge over time.
The HT-32P is passage door hardware from Sugatsune America, so it functions as a floor-mounted stop that sets a fixed swing limit for a passage door.
The clear acrylic bumper creates a cushioned impact surface, which helps soften contact between the door and the stop during normal opening cycles.
The 1-3/4 inch diameter head spreads impact across a wider area of the door edge, which helps reduce concentrated force at a single point.
This door stopper uses a stainless steel screw 8 x 50 with an anchor plug, which secures the unit into the floor for repeated door impacts.
The HT-32P uses a special wrench to tighten the assembly, which helps seat the stop firmly and maintain its position during repeated door use.
The satin finish keeps the floor mount stop visually subdued, which helps it coordinate with typical passage door hardware without drawing attention.
The HT-32P door stopper with clear bumper from Sugatsune America pairs a 1-3/4 inch diameter contact face with a floor mount, anchor plug, and stainless steel screw 8 x 50 to create a defined stop point for passage doors. That combination helps protect adjacent finishes while maintaining a consistent swing limit in daily use. For door and millwork projects sourced through Wurth Baer Supply, this floor-mounted passage door hardware component gives installers a clear, repeatable solution when a floor stop is the preferred way to control door travel.