35mm Door Stopper, Floor Mount, Satin Stainless Steel

35mm Door Stopper For Floor Mounted Control

35mm door stopper from Sugatsune America is a floor mount passage door hardware component that cushions a swinging door at a defined point, helping protect adjacent walls and trim in everyday use. Its 1-3/8 inch diameter footprint concentrates stopping power at the base of the door, so impact loads transfer into the floor structure instead of hinges or latch hardware. Being part of the builders hardware and passage door hardware category, it integrates into standard interior door layouts where a positive stop point is required. The floor mount layout positions the stop directly in the door swing path, which supports predictable contact and helps reduce overtravel on both commercial and residential projects. Branded by Sugatsune America, the DSD-02/S part number simplifies reordering and matching across multiple openings in the same job for consistent hardware selection.

Key Floor Mount Door Stopper Advantages

• The 35mm (1-3/8 inch) diameter body focuses stopping contact into a compact area at the floor, which helps control door swing without occupying extra wall space near the knob side.
• The floor mount design places the door stop at the threshold line, so the stopping point is defined by layout rather than wall position, which is useful when walls are offset or fully glazed.
• Placement under the door swing keeps the stop out of typical hand contact zones, which supports a cleaner look around the knob and hinge edges on passage doors.
• Classification as passage door hardware aligns this stop with non-latching openings, which fits doors that rely on controlled swing rather than locking function.
• Listing in builders hardware signals its role as a fixed structural component, which lets installers coordinate it with hinges, latches, and other door controls on the same schedule.

Floor Mount Door Stopper Layout And Fit

The floor mount format of the Sugatsune America DSD-02/S door stopper positions its 35mm diameter body directly on the finished floor surface, aligning the impact point with the lower rail of the door. This location allows swing control even when wall conditions vary, because the stop no longer depends on baseboard depth or wall plumb. As a passage door hardware element, the stop works within the clearance between the door bottom edge and floor finish, so installers can plan its centerline based on door thickness and swing arc. Using a single, fixed floor point also simplifies layout across multiple openings, since the same offset measurement can be repeated from hinge or jamb references to achieve uniform door hold positions.

Using The Sugatsune DSD-02/S Door Stop

Where This 35mm Door Stopper Fits Best

The Sugatsune America 35mm door stopper, identified by manufacturer part number DSD-02/S, fits projects where a floor mount stop is preferred over wall or baseboard-mounted options. Its 1-3/8 inch diameter profile suits typical interior openings where the stop can sit clear of the swing path when the door is closed yet remain fully engaged at the limit of travel. Being part of the builders hardware and passage door hardware category, it matches standard interior passage doors that do not rely on locking hardware but still need a defined open position. The floor level placement also supports layouts near glass sidelites, low walls, or open plan partitions, since the stopping function is handled at the floor rather than on potentially delicate wall finishes.

Why This Satin Stainless Steel Design Matters

The web description identifies the DSD FLOOR MOUNT DOOR STOP 1-3/8 DIA SS as being made from 303/304 stainless steel in a satin stainless finish, giving the Sugatsune America door stopper both material and surface characteristics tailored to daily door use. The 303/304 stainless steel construction provides a solid metal body, which supports repeated door contact as part of normal passage hardware function. The satin stainless appearance coordinates visually with many stainless door levers, hinges, and other builders hardware, helping create a consistent hardware set across the opening. The stainless material and finish also support use in typical interior environments where moisture or frequent cleaning contact may occur, since stainless steel resists common staining in those conditions. With the DSD-02/S designation clearly tied to this 303/304 stainless steel satin model, specifiers can call out the exact finish required when matching other components on the same door schedule.

Common Questions About The Sugatsune DSD-02/S Stop

Selecting This Door Stop For Your Next Opening

The Sugatsune America 35mm door stopper in satin stainless steel ties together floor mounted stopping, a 1-3/8 inch diameter footprint, and 303/304 stainless construction for passage door hardware layouts. With its DSD-02/S part number and classification under builders hardware and passage door hardware, it provides a clearly defined component for controlling door swing at the floor. For projects using stainless lever sets, hinges, or other satin stainless finishes, this door stopper supports visual alignment while delivering a fixed stop point in the opening.