65mm Wall Mount Door Stopper, Satin Stainless Steel

65mm Wall Mount Door Stopper For Passage Doors

65mm wall mount door stopper describes a compact stop that projects about 2-9/16 inches from the wall to catch a swinging door before it hits surrounding surfaces, helping protect adjacent walls or casework in everyday use. The satin stainless steel finish on this stop provides a muted metallic look that fits typical commercial and residential passage door hardware, so the stop visually matches other stainless components on the job. Sugatsune America branding on this DSD-03/S part number identifies it as a builders hardware component designed for passage doors, keeping it aligned with standard door hardware layouts. Being listed under passage door hardware ties this stop directly to doors without latches or locks where controlled opening travel still matters. The wall-mounted format positions the stop where the handle or lever would make contact, supporting predictable door swing limits.

Key Stainless Door Stop Details For Projects

• This DSD-03/S unit is made from 303/304 stainless steel, giving the stop a corrosion-resistant body that holds up in typical interior environments where cleaning and repeated contact occur.
• The 65mm, or 2-9/16 inch, length sets a fixed projection off the wall, positioning the contact point to intercept the door before hinges, trim, or levers touch adjacent finishes.
• The satin stainless steel finish tones down surface reflectivity, helping the door stop blend visually with other satin stainless passage door hardware while still looking clean on exposed walls.
• The product is categorized as builders hardware and passage door hardware, aligning it with standard swinging door installations where a positive, repeatable stop point is required.
• Sugatsune America as the brand and the DSD-03/S part number create a stable reference for ordering, stocking, and reordering the same door stop across multiple openings.

Wall Mounted Door Stop Fit And Installation Use

The wall mount door stop 2-9/16 long format positions the stop body directly on the wall where the door arc meets structure, so the strike point stays consistent every time the door opens. With a defined 65mm projection, installers can plan hinge locations and lever clearance so the stop contacts the intended area of the door edge or hardware, reducing alignment problems from guesswork. The 303/304 stainless steel material gives the stop a solid feel against the door, so repeated impacts during regular passage use remain controlled at a predictable distance from the wall surface. The satin stainless appearance helps the stop sit cleanly against painted or finished walls, making it suitable where hardware is visible and needs to coordinate with other stainless hinges or levers on the project.

How This Sugatsune Door Stop Works In Practice

Wall Mounted Stainless Stop At The Door Swing

This 65mm stainless wall mounted stop is sized so its 2-9/16 inch length reaches into the door swing path and becomes the physical limit of travel, preventing the door from contacting nearby walls or millwork during normal opening. Installed as passage door hardware, it functions as part of the swing control system, working with hinges to define the maximum opening angle, which is important where door levers or knobs could otherwise strike side walls. The 303/304 stainless steel construction lets the stop take repeated edge or lever impacts common on frequently used passage doors, so the controlled stopping point can be used over and over without changing the geometry of the opening. Its satin stainless surface also keeps the visible portion of the stop consistent with stainless hinges and other builders hardware in the same opening, supporting a unified appearance on corridor or room projects.

Details That Support Consistent Door Opening Results

The Sugatsune DSD-03/S designation ties this stop to a specific 65mm wall mount door stopper design, allowing planners to specify the same projection on multiple doors and expect identical swing limits across a project. Because the stop length is stated as 2-9/16 inches, layout calculations for clearances behind the door, around furniture, or near adjacent partitions can be based on that fixed projection instead of approximations. The 303/304 stainless steel body also provides a stable contact face so the stopping point does not deform easily under the door load, helping maintain the same effective opening angle over time. With a satin stainless finish matching other passage door hardware, the visual cue of this stop makes it clear where the door will land when opened, supporting consistent operation for users and predictable clearances for adjacent finishes.

Common Questions About This Wall Mount Door Stop

Select This Stainless Stop For Controlled Door Swing

This 303/304 stainless steel 65mm wall mount door stopper from Sugatsune America provides a defined 2-9/16 inch projection that sets a reliable limit for passage door swing. When a project calls for a satin stainless wall-mounted stop that aligns with standard builders hardware, this DSD-03/S part number gives a consistent choice for controlling door travel on multiple openings.