Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
125mm wall mount door stopper from Sugatsune America works as a fixed stop that limits door swing, protecting adjacent walls and finishes on passage doors. The manufacturer part DSD-03/L identifies this specific model, so installers can match specifications across projects. The SAP description stating 4-15/16 inch length defines the reach from the wall, which helps position the stop to intercept the lever or door edge before it contacts trim. Its listing under passage door hardware places it in standard door workflows, fitting typical non-locking interior openings where controlled swing is required. The satin stainless steel finish provides a neutral appearance that coordinates with common commercial and residential hardware, supporting consistent visual lines in high-visibility areas. Placement on the wall rather than the floor keeps the working element out of foot traffic, which can simplify cleaning paths along thresholds and finished flooring.
The description as a wall mount door stop defines the mounting surface as the wall, which guides installers to locate solid backing or suitable substrate before drilling. The stated 4-15/16 inch length indicates how far the stop projects, so crews can mark mounting height and horizontal offset to intercept the door at the desired angle. The use of 303/304 stainless steel supports drilling and fastening into common interior wall materials, since the body resists surface marking from normal contact. Being part of passage door hardware means it works within standard door clearances, helping layout teams coordinate stop placement with baseboard, casing, and adjacent casework without reworking door hardware.
The product name calling out wall mount installation directs this stop to the wall behind a swinging door rather than the floor or hinge. Its 125mm, or 4-15/16 inch, length lets the stop reach into the door swing path, so it can contact the door or handle before they reach the wall. Listing under builders hardware and passage door hardware positions it on standard interior openings, such as offices, corridors, and residential rooms where wall protection is required. The satin stainless steel finish helps it sit visually with other stainless levers and hinges, supporting use in projects that specify stainless door trim. Because the stop mounts on the wall, electricians and millworkers can coordinate outlet placement, casework edges, and trim details around the defined projection and impact zone.
The combination of 303/304 stainless steel gives the stop a stable, corrosion-resistant body, which maintains its shape and contact surface as doors repeatedly hit the bumper in normal use. The defined 4-15/16 inch length creates a consistent projection, so when multiple units are installed on a floor, each door stops at a similar angle, helping maintain clearances to sidelights, furniture, or adjacent doors. Being identified by the Sugatsune America part number DSD-03/L allows specifiers to repeat the same model across phases of a job, avoiding mixed stop lengths that change door swing behavior. The satin stainless steel finish also provides a predictable sheen, so replacement units blend with existing hardware without drawing attention. The classification as passage door hardware confirms its role in swing limitation rather than security, keeping its selection focused on impact control and wall protection.
The Sugatsune DSD-03/L wall mount door stopper has a stated length of 4-15/16 inch, or 125mm, which defines how far it projects from the wall to intercept the door swing.
The 125mm wall mount door stopper is described as 303/304 stainless steel, providing a corrosion-resistant body suitable for typical interior passage door environments.
The product is identified as a wall mount door stop, so its design and length focus on mounting to the wall behind swinging passage doors.
The satin stainless steel finish gives the stop a subdued sheen that pairs well with satin stainless levers and hinges on passage doors.
The stopper is categorized under passage door hardware, aligning it with non-locking interior doors where controlled swing and wall protection are needed.
The DSD-03/L is the manufacturer part number for this specific Sugatsune wall mount door stop, helping specifiers and installers match the exact model.
The stainless steel wall mount door stopper from Sugatsune America combines 303/304 stainless construction, satin stainless finish, and a defined 4-15/16 inch length to control passage door swing against walls. Its DSD-03/L designation and 125mm size make it straightforward to call out on drawings, order by part number, and repeat across multiple openings. For projects needing a consistent stop projection and a finish that pairs with satin stainless passage sets, this model offers clear dimensions and material details that support predictable results on site.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLDSD-02-S Mfr# DSD-02/S | 35mm Door Stopper, Floor Mount, Satin Stainless Steel | ||||
Sold in: 1 Each |  SLDSD-02-L Mfr# DSD-02/L | 35mm Floor Mount Door Stopper, Satin Stainless Steel |