Lapcon Door Damper, Suface Mount Type Spacers, 1/16" Thickness, Black

Lapcon Door Damper Spacer For Uneven Doors

Lapcon door damper spacer is a black spacer from Sugatsune America designed for the Lapcon door damper system, so it supports clean passage door hardware installations where the damper needs a stable mounting surface. This spacer is used to install the SLLDD-S counter plate on uneven door surfaces, giving the counter plate a flat, consistent base when a door panel is recessed or profiled. The 2 mm, or 1/16 inch, thickness helps bridge shallow variations on panel doors, keeping the counter plate aligned with the main Lapcon unit for smoother operation. As part of the Lapcon surface mount type setup, this spacer helps maintain the intended relationship between the counter plate and damper, which supports consistent soft closing performance over repeated use. The black color helps the spacer visually blend into darker door hardware layouts, keeping the installation discreet around the passage door edge.

Key Lapcon Spacer Details For Door Work

• This spacer is used to install the SLLDD-S counter plate on uneven door surfaces, so it supports reliable mounting where the door face is not perfectly flat.
• Suitability for panel doors means it helps bridge recessed or raised profiles, so the Lapcon counter plate sits on a more uniform surface.
• The 2 mm, or 1/16 inch, thickness provides a defined step, which helps align the counter plate height with the main Lapcon unit location.
• Availability in 2 mm and 3 mm thicknesses allows spacers to be mixed and matched, giving flexibility to match door surface variation more closely.
• Spacers still allow micro adjustments to be made for the main unit, so fine-tuning alignment remains possible after the spacer stack is chosen.

Surface Mount Spacer Use And Alignment

This spacer works with the Lapcon surface mount type damper setup, so it supports mounting the SLLDD-S counter plate on doors where the surface would otherwise throw off the geometry. Using the 2 mm, or 1/16 inch, thickness under the counter plate helps offset shallow steps in panel doors, so the hardware sits closer to the plane intended by the Lapcon design. Because the spacer is specified for uneven door surfaces, it contributes to steadier contact between the counter plate and the damper, which supports consistent closing behavior. The ability to combine thicknesses means the spacer can be part of a stacked solution where panel depth varies more than a single layer, while micro adjustments at the main unit keep the final alignment within the Lapcon system range.

Where This Lapcon Door Damper Spacer Helps

Using The Spacer On Uneven Panel Doors

This Sugatsune America spacer is specified for installing the SLLDD-S counter plate on uneven door surfaces, so it is particularly suited to panel doors where profiles interrupt a flat mounting area. When a panel door has recessed centers or raised edges, the 2 mm, or 1/16 inch, thickness lifts the counter plate off the low spots, helping it sit on a more even reference plane. Because it belongs to the Lapcon door damper setup in passage door hardware, the spacer supports applications where controlled door motion depends on the relationship between the counter plate and the main Lapcon unit. In these situations, bringing the counter plate closer to the correct plane helps the damper engage more predictably during closing. The black finish also integrates visually with typical dark-toned passage door hardware around the damper area.

Why Thickness And Adjustment Support Consistency

The spacer is available in 2 mm, or 1/16 inch, thickness and is part of a range that also offers 3 mm, or 1/8 inch, thicknesses, so installers can mix and match spacers for varying thickness. This flexibility allows the stacking of spacers to track the actual door surface variation, creating a more level mounting plane for the SLLDD-S counter plate where the door profile changes. Once the counter plate height is set with a chosen spacer combination, the fact that spacers still allow micro adjustments to be made for the main unit means the final Lapcon damper alignment can be fine-tuned rather than forced. For recurring passage door work, this combination of coarse height control by spacer thickness and fine control at the main unit supports repeatable damper behavior across different door styles. As a result, installers can keep the Lapcon door damper system closer to its intended geometry even when door constructions vary.

Common Questions About This Lapcon Spacer

Choose This Lapcon Spacer For Uneven Doors

This Lapcon door damper spacer from Sugatsune America is purpose-built for installing the SLLDD-S counter plate on uneven or panel door surfaces, so it fits jobs where the door profile would otherwise disturb the damper layout. The 2 mm, or 1/16 inch, thickness works within a system that also offers 3 mm options, allowing spacer combinations that better follow each door design. Because spacers still allow micro adjustments at the main Lapcon unit, it supports dialing in the final alignment without changing the door. For passage door hardware projects using the Lapcon damper, this spacer provides a straightforward way to stabilize the counter plate on irregular surfaces while preserving adjustment room at the main unit.