Sugatsune 1/8" Suface Mount Type Spacers for Lapcon Door Damper, Black, LDD-S-P3 BL

Lapcon Door Damper Spacer For Uneven Door Surfaces

Lapcon door damper spacer is a 3 mm (1/8 inch) black spacer designed for the Sugatsune SLLDD-S counter plate, so it sets a consistent stand-off when you are fitting Lapcon surface mount dampers on challenging door faces. Because this spacer is made specifically to install the SLLDD-S counter plate on uneven door surfaces, such as those on panel doors, it bridges recessed or raised profiles and helps keep the damper relationship stable across the swing. The 3 mm thickness defines how far the counter plate stands off the door, which helps you hit the operating range the damper needs instead of fighting marginal alignment. Black color keeps the component visually discrete against common dark hardware and door finishes while you set up the damper location. As part of the Lapcon system, this spacer supports a more controlled door close on doors that do not present a flat mounting field.

Key Lapcon Spacer Details That Help On Site

• The spacer is designed to install the SLLDD-S counter plate on uneven door surfaces, such as panel doors, so it levels the mounting face where the plate meets shaped door profiles and supports consistent damper function across the opening and closing cycle.
• Availability in both 2 mm (1/16 inch) and 3 mm (1/8 inch) thicknesses means you can mix and match spacers for varying thickness, so stacked combinations can be used to build out to the depth needed by a particular panel design or door style.
• The ability to mix and match spacer thickness lets you respond to different step depths on stile-and-rail or profiled doors using the same Lapcon damper family, which helps keep hardware choices standardized across a project.
• Even when you use these spacers, the system still allows micro adjustments to be made for the main unit, so final tuning of the damper position is done at the damper body instead of chasing exact spacer buildup.
• The defined 3 mm (1/8 inch) thickness on this model gives a repeatable reference for layout, so you can note dimensions and replicate the same setup across multiple similar doors in a run or on future service calls.

Surface Mount Spacer Use And Thickness Setup

This Lapcon door damper spacer is a surface mount type part for the SLLDD-S counter plate, so it works directly between the counter plate and the door face when the mounting area is not flat. The 3 mm (1/8 inch) thickness sets a fixed gap behind the counter plate, which is useful when a panel recess or molding step closely matches that build-out. Because spacers are available in both 2 mm (1/16 inch) and 3 mm (1/8 inch) versions, they can be mixed and matched for varying thickness, allowing you to stack values that track the depth of more complex door profiles. Spacers still allow micro adjustments to be made for the main unit, so once the counter plate is supported at the right depth, the damper body can be shifted within its adjustment range to refine closing feel and contact timing.

Using The Sugatsune Lapcon Spacer In Real Projects

Where This Lapcon Door Damper Spacer Fits Best

The spacer is specifically described as a way to install the SLLDD-S counter plate on uneven door surfaces, such as those found on panel doors, so it is naturally suited to stile-and-rail and other non-flat door constructions. When a door face steps back around a center panel, the 3 mm (1/8 inch) thickness helps bridge that difference so the counter plate is carried on a more level plane relative to the damper. Because availability spans 2 mm (1/16 inch) and 3 mm (1/8 inch) thicknesses, you can use a single 3 mm spacer on shallower profiles or combine it with a 2 mm unit on deeper recesses, keeping the Lapcon geometry in a workable zone. The black color aligns with the Lapcon hardware aesthetic, so when the counter plate and spacer sit near the door edge they read as a single component rather than a collection of unrelated parts during normal use.

Why Thickness And Micro Adjustment Support Repeatable Results

The declared 3 mm (1/8 inch) thickness of this spacer gives a known offset each time you place it under an SLLDD-S counter plate, so installers can record that build-up and repeat it quickly across many doors that share the same panel profile. Having both 2 mm (1/16 inch) and 3 mm (1/8 inch) thickness options that can be mix and matched for varying thickness means you are working in predictable steps, rather than shimming by eye with improvised materials, which supports consistent damper engagement from door to door. Because spacers still allow micro adjustments to be made for the main unit, you maintain fine control of the damper position even after setting the base thickness, letting you nudge the main unit for smoother contact without revisiting the spacer stack. This combination of fixed thickness and micro adjustment suits workflows where installers want a repeatable method for dialing in Lapcon door dampers on different panel door designs while using the same Sugatsune LDD-S-P3 BL spacer as a core component.

Common Questions About The Lapcon Door Damper Spacer

Select This Lapcon Spacer For Uneven Door Installs

The Sugatsune America LDD-S-P3 BL Lapcon door damper spacer is specified as a 3 mm (1/8 inch) black part for installing the SLLDD-S counter plate on uneven door surfaces, such as panel doors, so it directly supports surface mount Lapcon damper setups on profiled doors. With 2 mm (1/16 inch) and 3 mm (1/8 inch) options that can be mixed and matched for varying thickness, this spacer helps align the counter plate depth while still allowing micro adjustments at the main unit. Select this spacer when a defined 3 mm stand-off and a black finish are the right match for your Lapcon damper installation.