Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
MKR-N32 leveling glide is a furniture glide from Sugatsune America designed to support work surfaces and tables when the floor is not perfectly flat. The glide swivels approximately 10 degrees, so the base can stay in full contact with sloped or irregular flooring while the stem follows the leg, which helps the furniture sit solidly instead of rocking. The double structure of cover/bolt and base lets the height be adjusted without lifting the leg, allowing corrections after the piece is already standing. A 1-5/16 inch base diameter spreads the load over a defined area, helping support weight at each point. The 1-5/16 inch stem length gives a usable adjustment range within typical leg clearances. Dark gray color keeps the glide visually discreet under most furniture.
This Sugatsune leveling glide uses a double structure of cover/bolt and base so the height can be adjusted without lifting the leg, which helps during final alignment when the piece is already loaded. When the leveling glide can not be turned by hand, slightly lifting it allows further adjustment, which is helpful where floor friction resists turning. The swivel function, at approximately 10 degrees, lets the stem follow the leg angle while the base seats on the floor, reducing side load on the leg. With its elastomer base and knurled outer periphery, the glide stays planted while small height changes are made, giving precise control.
This furniture glide belongs to the work surface and tables category with T-nuts and glides, so it is suited to legs that need height correction. The 1-5/16 inch base diameter and elastomer material create a defined contact patch that supports the load while guarding against skidding, which is useful under benches or tables that are occasionally moved. Dark gray color helps the MKR-N32DG32 leveling glide stay unobtrusive under cabinets or furniture, keeping attention on the finished piece. The swivel function, specified at approximately 10 degrees, lets a bank of legs share the load more evenly when the floor slopes slightly. As the base swivels to match the floor, the stem maintains alignment with the leg, supporting stable positioning.
The swivel function of this leveling glide distributes the load evenly across the elastomer base, which reduces point pressure and supports durability at each contact point. The knurled outer periphery on the base provides mechanical grip against the floor surface, so the glide resists twisting while height is adjusted through the cover and bolt. Because the double structure allows height adjustment without lifting the leg, installers can correct level and pitch after assembly, which can reduce rework time. The elastomer base is specifically described as preventing skidding and scratching, so finished hard floors remain protected while furniture settles under load. Combined with the 1-5/16 inch stem length, the design gives a compact leveling solution that supports precise setup on uneven floors.
The leveling glide swivels approximately 10 degrees, letting the base match floor angle while the stem follows the leg, which helps keep furniture stable on irregular surfaces.
The double structure of cover/bolt and base allows height adjustment without lifting the leg, which supports final leveling after the furniture is already standing.
The leveling glide uses an elastomer base to prevent skidding and scratching, which helps protect hard floors while furniture is positioned or loaded.
The 1-5/16 inch base diameter and 1-5/16 inch stem length give a compact footprint with enough height range to level typical furniture legs.
The base has a knurled outer periphery that increases grip at the contact edge, which helps resist slipping while adjustments or side loads occur.
This furniture glide is listed for work surfaces and tables with T-nuts and glides, so it suits legs that require leveling on uneven floors.
This Sugatsune America MKR-N32DG32 leveling glide combines swivel function, elastomer base, and a knurled outer periphery to support work surfaces and tables on uneven floors. The 1-5/16 inch base diameter and 1-5/16 inch stem length create a compact, adjustable support point. With its double structure of cover/bolt and base, height changes can be made without lifting the leg, which streamlines setup. For furniture or fixtures that demand solid footing and floor protection, this dark gray leveling glide provides a targeted solution.