Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
MKR-N LEVELING GLIDE 2-3/8 BLACK M10 is a Sugatsune America furniture glide that supports work surfaces and tables where floors are not perfectly flat. The leveling glide is designed as a furniture component so installers can fine-tune leg height and help stabilize cabinets, tables, or workstations. The web description notes that the glide swivels approximately 10 degrees, which lets the base sit flat even when the floor is slightly out of level, improving contact and reducing rocking. The same description specifies a double structure of cover/bolt and base, which means height adjustments are made through the glide assembly itself, helping you correct small level differences without reworking the leg. The elastomer base is described as preventing skidding and scratching the floor, so the glide both helps hold furniture in place and reduces the risk of floor surface damage during normal use.
The product name specifies a 2 inch base diameter, so the contact area under each leg is broad enough to spread weight and support work surface or table loads across more floor area. The same name notes a 1-3/4 inch stem length, giving a defined threaded section to thread into the leg and still retain range for height tuning. The SAP description identifies the glide as M10, so it is set up for locations using M10 threaded receivers in the furniture leg or mounting point. The web description explains that the double structure of cover/bolt and base allows easy height adjustment without lifting the leg, so installers can rotate the glide to bring a work surface into level while the piece is standing, which helps with final tweaks after a run of cabinets or tables is in place.
The category listing of Work Surface & Tables and T-Nuts and Glides places this Sugatsune America MKR-N50M10H60 glide in furniture and workstation applications, where threaded glides are used at the leg ends. The product class of Furniture Glides further ties it to movable pieces such as tables, benches, or cabinets that rest on individual legs rather than continuous bases. The leveling glide design described in the web text is intended to compensate for uneven floors, so it is suited to installs where existing floors have minor irregularities that would otherwise leave a leg hanging or rocking. The swiveling base, noted as approximately 10 degrees, allows the contact face to sit flat even if the leg is slightly off square to the floor plane, which helps each leg carry its intended share of the load.
The web description also states that the leveling glide has an elastomer base to prevent skidding and scratching the floor, so it supports use on finished surfaces where surface marking is a concern. In shop or commercial spaces with smooth floors, this elastomer contact helps the furniture resist sliding when bumped, while still allowing repositioning with controlled effort. The black finish referenced in the SAP description and product name gives the glide a neutral appearance at the leg bottom, which suits darker furniture bases and work tables where exposed hardware must remain visually unobtrusive. By combining the M10 threading, the elastomer contact, and the swivel function, the glide fits into a leg design that needs precise height control without sacrificing floor protection.
The web description notes that the glide swivels approximately 10 degrees to compensate for uneven floors, which means the base can pivot relative to the stem and keep full contact even when a floor slopes slightly. This pivoting contact helps avoid point-loading and reduces the chances of one edge digging into the floor surface, which can happen with fixed glides. The same description describes the swivel function as distributing the load evenly for excellent durability, so the contact pressure is spread across more of the elastomer area under normal furniture loads. That even distribution minimizes localized stress on both the glide and the floor finish, supporting longer service life of both components.
The description further identifies a double structure of cover/bolt and base that allows easy height adjustment without lifting the leg, so the installer can rotate the threaded portion to raise or lower the corner while the furniture is already standing. This design streamlines leveling during final set-up, especially on multi-leg assemblies where repeated lifting would be cumbersome. The elastomer base is stated to prevent skidding and scratching the floor, blending traction with protection so the glide resists sliding from minor impacts while helping protect wood, laminate, or similar finished surfaces from abrasion. Together, the swivel action, M10 threaded stem, and elastomer contact provide a leveling component that supports practical field adjustment while managing how forces are transferred to the floor.
The leveling glide is described as compensating for uneven floors, so it helps stabilize tables or cabinets when surfaces are slightly out of level, reducing rocking and improving contact at each leg position.
The web description states that the glide swivels approximately 10 degrees, allowing the base to pivot to meet sloped or irregular floors so the contact face remains flat under the leg.
The product name specifies a 2 inch base diameter, so the glide presents a comparatively broad contact area to spread loads and support work surfaces or tables over a larger floor footprint.
The SAP description notes M10, so this glide is intended for use with M10 threaded leg receivers or inserts where that metric thread standard is required.
The web description highlights a double structure of cover/bolt and base that allows easy height adjustment without lifting the leg, so final leveling can be done while the furniture stands.
The Sugatsune America MKR-N50M10H60 leveling glide combines a 2 inch base diameter, 1-3/4 inch stem length, and M10 threading to tie into furniture legs that require controlled height adjustment. The web description confirms a swivel range of approximately 10 degrees and a double structure that allows height changes without lifting the leg, supporting efficient leveling on irregular floors. The elastomer base is designed to prevent skidding and scratching the floor, so this glide simultaneously manages traction and surface protection. For work surfaces, tables, or similar furniture built around threaded feet, these verified characteristics let you standardize on a component that balances adjustability, load spreading, and care for finished floors.