Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
MKR-N40M10 leveling glide is a Sugatsune America furniture glide designed to stabilize work surfaces and tables. The glide has a black base that functions as a floor contact point, so the furniture leg rests on a controlled surface instead of directly on the floor. A 1-5/8 inch base diameter spreads the load over a wider area, which helps support weight without concentrating pressure on a small point. The product swivels approximately 10 degrees to compensate for uneven floors, allowing the base to stay flat against the floor while the leg sits at a slight angle. This swivel function distributes the load evenly for excellent durability in regular furniture use. The glide belongs to the Work Surface & Tables, T-Nuts and Glides category, so it fits applications where level support and adjustability around benches or tables matter.
The leveling glide uses a double structure of cover or bolt and base, so height can be adjusted while the furniture leg remains loaded on the glide. This design allows the installer to dial in final height without raising the work surface, which saves effort when benches or tables are already positioned against walls or other fixtures. When the glide cannot be turned by hand, slightly lifting it allows adjustment of the threaded element, which helps fine-tune level on heavier items. The swivel function working with the 1-5/8 inch base diameter helps the installer create a broad, flat contact patch, improving stability while compensating for minor floor slope or variation.
This Sugatsune America furniture glide is categorized under Work Surface & Tables and T-Nuts and Glides, so it suits installations where benches, tables, or similar furniture must sit steady on imperfect floors. The 1-5/8 inch base diameter supports the bottom of a leg with a relatively broad footprint, which is useful under heavier work surfaces that might otherwise dig into softer flooring. The black base functions as the direct floor interface, so the leg material stays separated from contact with concrete, tile, or wood surfaces. The elastomer base both resists skidding and reduces scratching, making it suitable for furniture that might be repositioned during normal activity.
The leveling glide uses a double structure of cover or bolt and base that allows height adjustment without lifting the leg, so installers can correct for irregular floors after the furniture is standing. This structure supports a workflow where leveling happens as a final step, with the work surface already loaded. The glide swivels approximately 10 degrees, which lets the base maintain full contact with sloped or uneven floors while the leg stays connected through the threaded section. By distributing the load evenly through the swivel function, the glide supports excellent durability over time because force does not concentrate at a single corner of the base. The elastomer floor-contact surface works with the swivel action to maintain grip as the angle shifts, helping the furniture remain stable when bumped or during side loads common on work tables.
The MKR-N40M10 leveling glide is a Sugatsune America furniture glide designed for work surfaces and tables, so it supports legs that need adjustable height and stable floor contact.
The leveling glide swivels approximately 10 degrees, allowing the base to sit flat on uneven floors so load is spread across the whole base instead of the edge.
The leveling glide elastomer base prevents skidding and scratching, so furniture stays more stable during side loads and finished floors remain protected during use.
The 1-5/8 inch base diameter spreads the furniture load over a larger contact area, helping support weight while reducing pressure on the floor surface.
The double structure of cover or bolt and base allows height adjustment without lifting the leg, so installers can level furniture while it remains in position.
This leveling glide is listed under Work Surface & Tables and T-Nuts and Glides, aligning it with benches, tables, and similar furniture needing adjustable support.
This MKR-N40M10 leveling glide from Sugatsune America combines a 1-5/8 inch base, elastomer floor contact, and approximately 10 degrees of swivel to support stable furniture on uneven floors. The double structure of cover or bolt and base allows height adjustment without lifting the leg, which streamlines leveling during installation or setup changes. For work surfaces and tables that need controlled contact with the floor and practical fine-tuning of height, this furniture glide offers a focused solution for everyday shop and furniture environments.