Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
MKR-N LEVELING GLIDE 1-13/32 BLACK M10 describes a Sugatsune America leveling glide that stabilizes work surfaces and tables, so installers can set furniture solidly on uneven floors. This glide is part of the Furniture Glides product class in the Work Surface & Tables and T-Nuts and Glides category, so it is geared to supporting furniture legs where consistent contact with the floor is critical. The leveling glide has a black base with a 1-13/32 inch diameter, so it spreads the load over a defined footprint to help support weight without concentrating pressure in a tiny point. The stem uses an M10 thread with a 7/8 inch stem length, so it adjusts height within the threaded range while staying compact under the leg. The product name specifies leveling glides with swivel function, so each glide is designed to adjust both in height and in angle at the base, supporting stable setups on typical jobsite or finished-floor conditions.
The leveling glide incorporates a swivel function that allows approximately 10 degrees of movement at the base, so the foot can sit flush to sloped or wavy floors while the leg remains straight for a cleaner installed appearance. The double structure of cover or bolt and base is described as allowing easy height adjustment without lifting the leg, so installers can fine-tune level from a single point on each corner while the work surface stays in position. The 1-13/32 inch black base diameter defines the size of the contact area, so the load is shared across a consistent circle of elastomer that is wide enough to support furniture glides in the stated category. The elastomer base is described as preventing skidding and scratching the floor, so the material under the furniture helps maintain position and protects typical finished surfaces as the piece is moved slightly during use.
This Sugatsune America product is identified as a leveling glide within the Furniture Glides product class and the Work Surface & Tables category, so it is suited to legs on work tables, surfaces, and similar furniture that need adjustable feet. The black base with a 1-13/32 inch diameter provides a defined footprint, so it supports loads under furniture legs where a modest, practical contact area is appropriate. The M10 stem with a 7/8 inch stem length fits threaded leg inserts or components designed for that stem size, so it works where installers already plan around M10 glide connections. The elastomer base is described as preventing skidding and scratching the floor, so this glide functions well in environments where finished flooring needs protection under work surfaces and tables while still maintaining position under normal use.
The leveling glide swivels approximately 10 degrees to compensate for uneven floors, so each foot can seat firmly even when the floor falls off or has small irregularities, reducing rocking and improving stability on job installations. The swivel function is described as distributing the load evenly for excellent durability, so loads are shared across more of the base under typical conditions, which supports consistent performance after repeated adjustments. The double structure of cover or bolt and base allows easy height adjustment without lifting the leg, so installers can rotate the adjustment section while the furniture stays in place, speeding up leveling across multiple points. When the leveling glide cannot be turned by hand, slightly lifting it is described as a way to adjust it, so there is a clear method for situations where friction under load resists rotation. Combined with the elastomer base that prevents skidding and scratching the floor, the design supports both a stable stance and a floor-friendly contact point as work surfaces and tables are set up and then used over time.
The Sugatsune MKR-N32M10 is a leveling glide in the Furniture Glides product class, so it serves as an adjustable foot for work surfaces, tables, or similar furniture legs.
The leveling glide swivels approximately 10 degrees to compensate for uneven floors, so the base tilts to contact the surface fully and reduce rocking under the leg.
The leveling glide has a 1-13/32 inch black base diameter, so it spreads the load over a defined circular footprint under the furniture leg.
The leveling glide uses a double structure of cover or bolt and base to allow height adjustment without lifting the leg, so level can be set while furniture stays in position.
The leveling glide uses an M10 stem with a 7/8 inch stem length, so it fits applications designed around that thread size and compact vertical dimension.
The leveling glide has an elastomer base to prevent skidding and scratching the floor, so it provides grip and surface protection under normal furniture use.
This Sugatsune America leveling glide with swivel function, 1-13/32 inch black base, and M10 stem is designed to stabilize work surfaces and tables on uneven floors. The double structure that allows height adjustment without lifting the leg fits trim-out workflows where fine leveling is needed after placement. The elastomer base that prevents skidding and scratching supports use over finished floors while maintaining position. For projects that call for an adjustable Furniture Glides solution in the Work Surface & Tables category, this MKR-N32M10 part number provides the stated swivel and leveling functions in one compact component.