
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune 14 inch soft closing flipper door mechanism is an up and under flipper slide designed for overhead applications where the door moves up and over the opening. It is made for inset doors, so the door sits flush in the cabinet opening, which helps create clean cabinet lines in multimedia, closet, or workspace runs. The mechanism incorporates patented Lapcon technology, which provides soft, smooth closing that reduces slamming at the end of travel. That gentle closing action helps protect the door and cabinet from impact wear while giving a controlled, professional motion. The product is a single soft-closing flipper door mechanism, so one mechanism manages the soft-close function on a flipper door leaf in the system. The manufacturer part number IF-360S-14 clearly identifies this specific 14 inch model when matching existing hardware on a project.
This soft-closing flipper door mechanism is for inset doors only, so it is suited to doors that sit within the cabinet opening rather than overlaying the face. It is specified for door thickness from 15mm to 20mm, which defines the practical range of door materials that can work with the mechanism. That thickness range lets the installer choose common cabinet door constructions while keeping the hardware in its intended operating window. The closing speed is adjustable, so the soft-close behavior can be tuned after installation to match the actual door weight and swing feel. By combining the inset requirement, thickness range, and adjustable closing speed, the mechanism supports a flipper door setup that can be dialed in for predictable motion and clean alignment.
The IF-360S-14 soft close flipper slide belongs to the overhead flipper slides category, so it is intended for up and under cabinet door motion in areas such as multimedia and workspace components. As an up and under flipper slide, it guides the door up and then back over the cabinet opening, leaving the opening clear for equipment, supplies, or work surfaces. Being for inset doors only, it matches cabinet layouts where the designer wants the door front to sit flush with surrounding panels. The specified 15mm to 20mm door thickness range supports many standard cabinet door builds that fall in that band. In practice, this range helps coordinate hardware choice with common door constructions used in closets, garages, and office or shop cabinetry.
The mechanism incorporates patented Lapcon technology for soft, smooth closing, which slows the flipper door at the end of travel and reduces sudden impact. In daily operation, that controlled deceleration helps limit stress on the cabinet case and door joints. The adjustable closing speed lets installers set the soft-close action to suit the specific door weight and user expectations, which supports consistent feel across multiple cabinets on the same run. As an up and under flipper slide, it keeps the door parked above the opening while in use, so front access remains open without the door swinging into the user space. Because the product is identified as IF-360S-14, it can be matched to drawings or previous installs using that exact part number, helping maintain continuity when expanding or refurbishing a run of cabinets built around this mechanism.
The Sugatsune 14 inch single soft-closing flipper door mechanism is for inset doors only, so it works where the door sits within the cabinet opening rather than overlaying the face.
The IF-360S-14 mechanism is specified for 15mm to 20mm door thickness, which covers many typical cabinet door constructions used in residential and workspace cabinetry.
The mechanism incorporates patented Lapcon technology for soft, smooth closing, which slows the door at the end of travel and helps reduce slamming during everyday operation.
The soft-closing flipper door mechanism provides adjustable closing speed, so the motion can be tuned to the door size and application for a controlled, predictable close.
This product is an up and under flipper slide, so the door lifts and then travels back above the opening, keeping the access area clear while the door is open.
The manufacturer part number IF-360S-14 identifies this specific 14 inch single soft-closing flipper door mechanism, which supports accurate selection and matching on repeat projects.
The Sugatsune 14 inch single soft-closing flipper door mechanism combines an up and under flipper slide layout with Lapcon soft, smooth closing. Its 15mm to 20mm inset door capability and adjustable closing speed support controlled motion on overhead doors. Using part number IF-360S-14 when ordering aligns this mechanism with design notes and previous installs that specify this exact up and under flipper slide.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SLIF-360S-16 Mfr# IF-360S-16 | Sugatsune 16" Single Soft-Closing Flipper Door Mechanism, 15mm - 20mm Door Thickness, - IF-360S-16 | ||||
Sold in: 1 Each | SLIF-360S-24 Mfr# IF-360S-24 | Sugatsune 24" Single Soft-Closing Flipper Door Mechanism, 15mm - 20mm Door Thickness, - IF-360S-24 |